[mrtg] FW: Re: monitoring bandwidth

[Ritch McGreevy]

-----Original Message-----
From: Ritch McGreevy 
Sent: Wednesday, October 25, 2000 11:06 PM
To: 'Mike Holley'
Cc: Mrtg (E-mail 2)
Subject: RE: [mrtg] Re: monitoring bandwidth


Perhaps I am unclear on the specifics.
Only 1 of the servers is collocated at my location.  Through the frame relay
(HSSI) interface the customer is accessing both the internet and their
collocated server.  The internet access is billable while the access to
their server is non-billable.  Also the collocated server receives web hits
from the internet at large (which is billable). 
I know I can monitor the frame ckt.(by dlci) and the collocated server (by
ip address). I need to separate the server access from the internet access
(on the dlci)to obtain a billable bandwidth avg.  Is this possible???  
This a two-part problem.
The first being resolved.  Separating the customer accessing the server from
web traffic. ip traffic - dlci traffic = billable traffic on the server.
(this portion is resolved).
The second being separating the customer accessing the server from the
customer accessing the internet.  total traffic (on dlci) - nonbillable
traffic (server access) = billable traffic across the dlci.  This is the
portion I am having the problems with  

I know that this is a weird situation and any help is appreciated.

Ritch McGreevy

-----Original Message-----
From: Mike Holley [mailto:mholley at deltacontrols.com]
Sent: Wednesday, October 25, 2000 10:29 PM
To: Ritch McGreevy; Mrtg (E-mail)
Subject: [mrtg] Re: monitoring bandwidth



Check out the mrtg-ipacc sub-directory in the contrib folder that is
included with MRTG. It looks like this will allow you to generate reports
based on communicating pairs of systems according to the IP ports numbers
that they are using. You should be able to break up the billable from
non-billable traffic based on IP port numbers.

----- Original Message -----
From: "Ritch McGreevy" <rmcgreevy at gramtel.net>
To: "Mrtg (E-mail)" <mrtg at list.ee.ethz.ch>
Sent: Wednesday, October 25, 2000 7:19 PM
Subject: [mrtg] monitoring bandwidth


>
> I have an interesting predicament and any help would be appreciated.
>
> I have a collocated server that has a frame relay link from the customer
to
> me.  The bandwidth used to access their server is free.  The frame relay
> link also has internet access on it, which is not free bandwidth.    The
> collocated server also receives hits from the internet at large, which is
> billable bandwidth.  My question is how do I separate the non-billable
> bandwidth from the billable.
>
> I am monitoring the internet interface (at the router) for total bandwidth
> usage.
> I am monitoring the port on the switch (by ip) for total bandwidth usage
by
> the server.
> I am monitoring the serial interface for total bandwidth coming in from
the
> customer.
>
> Any suggestions on how to separate the billable from the non-billable ??
>
> Ritch McGreevy
> Systems Engineer
>
> GramTel Communications, Inc.
> Intelligent Infrastructure [Secure and Simple]
> 316 E Monroe St.
> South Bend, Indiana USA 46601
> P 219.472.4726
> F 219.472.0904
> www.gramtel.net
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi