[mrtg] Re: Log not being correctly populated when using operands inside of t he target

Paul C. Williamson pwilliamson at MANDTBANK.COM
Thu Oct 26 15:58:34 MEST 2000


John,

It could be because the value in MaxBytes is less than the value you are getting with MRTG.  Try upping that value from 100 to something else temporarily.  Another test would be to just have either the first set of OIDs or the second set.  Then add one of the operands (not the other set of OIDs, though).  Then the other set.  See when things start going haywire.

I'm not sure if I missed the first part of this thread, but did you ever say what values you were getting on that first line of the .log file?

Paul

>>> "John W. Bankson" <jbankson at pswlaw.com> 10/26/00 09:45AM >>>

	I'll try to ignore the flaming RTFM messages and repost my question
with more information.   

	I have read the manual, several times in fact, and I do specify the
gauge option for this target.  Thus my posting on this message board.  

	So, I will pose the question again along with all of the settings I
have for this target (My mistake for not doing so the first time).  I think
that I have something incorrect in my target (i.e. something to do with MRTG
requiring at least two inputs)  Anyway, the first line of the log file is
getting populated with the correct numbers, but then the rest of the number
stay at zero.  

	Can anyone tell me why this target is only logging the first line of
the log file?  Is there something else I have done wrong?  Thanks in
advance. 


John IRTFM

---------------------------------------------------------------------------
Target[PAPPS_Total_Mem]: 100 -
1.3.6.1.4.1.232.11.2.13.4.0&1.3.6.1.4.1.232.11.2.13.4.0:public at 10.3.1.34 /
1.3.6.1.4.1.232.11.2.13.3.0&1.3.6.1.4.1.232.11.2.13.3.0:public at 10.3.1.34 *
100
MaxBytes[PAPPS_Total_Mem]: 100
Title[PAPPS_Total_Mem]: PAPPS Total Memory Free
ShortLegend[PAPPS_Total_Mem]: %
YLegend[PAPPS_Total_Mem]: Memory Utilization
Unscaled[PAPPS_Total_Mem]: ymwd
WithPeak[PAPPS_Total_Mem]: ymwd
XSize[PAPPS_Total_Mem]: 380
YSize[PAPPS_Total_Mem]: 100
Options[PAPPS_Total_Mem]: growright, gauge
Legend1[PAPPS_Total_Mem]: % Total Memory Used
Legend2[PAPPS_Total_Mem]: 
Legend3[PAPPS_Total_Mem]: 
Legend4[PAPPS_Total_Mem]: 
LegendI[PAPPS_Total_Mem]:
LegendO[PAPPS_Total_Mem]: &nbsp;Usage:
---------------------------------------------------------------------------

-----Original Message-----
From: Daniel R . Kilbourne [mailto:drk at voyager.net] 
Sent: Wednesday, October 25, 2000 7:16 PM
To: John W. Bankson
Cc: Mrtg (E-mail)
Subject: [mrtg] Re: Log not being correctly populated when using
operands inside of t he target



g-a-u-g-e ?
or, should I say, R-T-F-M ?


On Wed, Oct 25, 2000 at 05:30:41PM -0500, John W. Bankson spake:

> I am trying to graph the memory utilization on some Compaq NT servers.  I
		           ^^^^^^

-- 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Daniel R. Kilbourne
daniel.kilbourne at voyager.net 
Voyager.net Network Engineer

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 


    ----------------------------------------------------------------
    This  electronic mail  message contains CONFIDENTIAL information
    which is (a) ATTORNEY - CLIENT  PRIVILEGED  COMMUNICATION,  WORK
    PRODUCT,  PROPRIETARY IN  NATURE, OR  OTHERWISE PROTECTED BY LAW
    FROM  DISCLOSURE,  and  (b) intended  only for  the  use  of the
    Addressee(s)  named  herein. If you are not an Addressee, or the
    person  responsible for delivering this to an Addressee, you are
    hereby  notified  that  reading,  copying,  or distributing this
    message is prohibited. If you have received this electronic mail
    message  in error, please reply to the sender and take the steps
    necessary  to delete  the message  completely from your computer
    system. Thank you.



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list