[mrtg] Re: Any other ways of refering to interfaces in config files?

[Matthew Shields]

Take a look here http://www.ulg.ac.be/~pirard/Cisco/mrtg_descriptors.htm

Matthew Shields
Verio New England(MA,CT,NH,ME,RI,VT)
Customer Installation Engineer
mas at verio.net 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Dave Parkin
Sent: Friday, September 08, 2000 4:23 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Any other ways of refering to interfaces in config
files?



I'm using mrtg to look at port traffic on a variety of cisco routers.
Currently my configs look like this:

Target[44lif-7500.1]: 1:commstr at 44lif-7500

(I use nis for the name resolution of 44lif-7500 to its ip address)

Problem is, if I add interfaces to the router and the number scheme gets
re-arranged (which isn't unreasonable!) but my mrtg configs start referring
to the wrong port. Is there another way of writing the configs so that they
somehow use the ip address of the port or a cisco port name (eg.
Serial8/1/3)

tia

Dave


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi