[mrtg] Sorting graphs by descr on Indexmaker

[Nasreddine Tabet-Aoul]

I appreciate any help on that or has anyone experienced the same problem as
I have.

I am monitoring all our router interfaces on the bandwidth and the packet
discards which I am doing well. I am also filtering the graphs based on
pagetop.

However, I liked to put to put two graphs (2 Columns in indexmaker) per
interface one for each stat. 
I tried to sort the graphs by 'descr' but they appear not in the right
order. I tried the other parameters 'name' and 'title' but with no avail

ANy views 

Thanks

Nas 

-----Original Message-----
From: Marc Bilodeau [mailto:marc at somix.com]
Sent: 30 March 2001 20:19
To: Nasreddine Tabet-Aoul; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Re: HP and Inkotomi Mibs


What version of HPUX are you using?

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Nasreddine Tabet-Aoul
Sent: Friday, March 30, 2001 11:41 AM
To: Marc Bilodeau; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: HP and Inkotomi Mibs




I have just downloaded the new RFC Mibs. I do not see anything under
MIB-II/Host.Does mean that MIB-II is not loaded on the server.

However I do see a lot under private.enterprises.hp.nm.hpsystem.x.x.x . I
cannot translate the OID through getif. Which MIB I need to translate this?
At the moment I am using the HP mib from SOMIX.

Many thanks

Nas.
-----Original Message-----
From: Marc Bilodeau [mailto:marc at somix.com]
Sent: 30 March 2001 15:51
To: Nasreddine Tabet-Aoul; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] HP and Inkotomi Mibs


I believe that HPUX uses the MIB-II HostMIB for CPU, HDD, etc.. That you can
get from the somix mib site under RFC MIBs.

|-------------------------------------------------------------------------|
|Marc Bilodeau		|    WebNM http://www.somix.com/products/webnm/	  |
|Somix Technologies,Inc.|   Denika http://www.somix.com/products/denika/  |
|1293 Main St.		| I*SYSTEM http://www.somix.com/products/isystem/ |
|Sanford, ME 04073	|
|
|				| MRTG Configuration Fragments
|
|P: (207) 324-8805 x223	| http://www.somix.com/software/mrtg/		  |
|F: (207) 324-8683	|
|
|				| MIB Repository
|
|marc at somix.com		| http://www.somix.com/software/mibs/		  |
|-------------------------------------------------------------------------|

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Nasreddine Tabet-Aoul
Sent: Friday, March 30, 2001 4:54 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] HP and Inkotomi Mibs




Hi there,

I like to monitor some HPUX servers running Inkotomi software for CPU,memory
and other performance that we can  get.

I run the HP mib obtained from the Somix web site on Getif but this doesn't
show the details of the HPsystem mib part. We could see the OID but no
explanation given.

On the Inkotomi side I do not have anything on it.

I appreciate any help from where we can download the corresponding MIBs.

Many thanks

Nas


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi