[mrtg] Re: kMG confusion :(

[Daniel J McDonald]

 From: Alex van den Bogaerdt
> Sent: Saturday, March 31, 2001 7:22 PM
> To: John Navarro
> Cc: MRTG users
> Subject: [mrtg] Re: kMG confusion :(
>
> John Navarro wrote:
>
> > My graphs show a maximum value to 1280.0k for my gigabit
> ethernet.  How
> > can I make it show 128.0m instead?  My maxbyes is set correclty.  I
> > can't figure out the kMG line - how frustrating.
>
> You should probably not use a kMG line at all.

Actually, the problem is that SNMP V1 32 bit counters roll over at about
128mb/s with a five minute sample.  change to snmp V2c 64 bit counters and
remove all of the kMG stuff and it will work fine.

e.g:
target[router-ge0-0] #ge0/0:public at 172.16.0.1:::::2

Daniel J McDonald - CCIE 2495, CNX
Principal Network Specialist
Digicon Technologies
http://www.digicontech.com
dmcdonald at digicontech.com

Digicon - A Cisco Systems Partner, Silver Certified.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi