[mrtg] Re: Cisco ATM Interface

[Christopher Wiley]

I've encountered this problem too with the Cisco 4700 and would appreciate any
input.  The subinterfaces also cannot be accessed as well.
Here's what I get back on those:

### Interface 13 >> Descr: 'ATM0/1/0-atm layer' | Name: '' | Ip: '' | Eth: ''
###
### The following interface is commented out because:
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.13)

### Interface 14 >> Descr: 'ATM0/1/0-aal5 layer' | Name: '' | Ip: '' | Eth: ''
###
### The following interface is commented out because:
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.14)

----------------------------------------------------------------'

"Wilhoit, Tim" wrote:

> I have a Cisco ATM interface in a 4700 router.  I would like to monitor both
> the physical interface and the subinterfaces on it.  When I run cfgmaker on
> it the config says the ATM interface is disabled because it is a DS3
> controller.  Is there anyway to get MRTG to monitor this interface?
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


-- Attached file removed by Listar and put at URL below --
-- Type: text/x-vcard
-- Desc: Card for Christopher Wiley
-- Size: 433 bytes
-- URL : http://www.ee.ethz.ch/~slist/pantomime/02-Chris.Wiley.vcf


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi