[mrtg] Re: MRTG through firewall issue

[Reed Mohn, Anders]

Thanks :)

Had a look at the .CFG-file.
These interfaces are set to "IP unnumbered",
and thus the variable MRTG_INT_IP was set blank.
Could that be it?  
Added the router IP, anyway, so we'll se in a minute..

Cheers,
Anders RM :)



-----Original Message-----
From: David Sawyer [mailto:david.sawyer at uk.mckhboc.com]
Sent: 9. april 2001 16:09
To: 'Reed Mohn, Anders'; 'Nick Bown'
Cc: mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Re: MRTG through firewall issue


All I have configured on our F/W is UDP 161 (SNMP) and UDP 162 (SNMP traps,
used only for our NMS system).

Nick:
Have you added the rule both inbound and outbound?

Anders:
If Eth0 is ok then your F/W is correctly set up, check your target, are you
sure it's the right one?
Try using the interface description to name your target.

HTH
Dave



----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi