[mrtg] Ok, Thresholds and mailing

[Josh Goldfarb]

Ok now is my turn again for thresholds.. this time I will paste a little
piece of config file.
 
Target[UnionDC-atworkInternets1]: #Et2/0:monitor @ x.x.24.1:
<mailto:#Et2/0:monitor @ x.x.24.1:> 
SetEnv[UnionDC-atworkInternets1]: MRTG_INT_IP="10.252.0.2"
MRTG_INT_DESCR="Serial2/0"
MaxBytes[UnionDC-atworkInternets1]: 193000
ThreshMinI[UnionDC-atworkInternets1]: 12000
# upper limit you don't want to be crossed for INPUT traffic
ThreshMaxI[UnionDC-atworkInternets1]: 17200
# prog to run when any of the two limits is crossed
ThreshProgI[UnionDC-atworkInternets1]: threshold.bat
 
# lower limit you don't want to be crossed for OUTPUT traffic
ThreshMinO[UnionDC-atworkInternets1]: 12000
# upper limit you don't want to be crossed for OUTPUT traffic
ThreshMaxO[UnionDC-atworkInternets1]: 17200
# prog to run when any of the two limits is crossed
ThreshProgO[UnionDC-atworkInternets1]: threshold.bat
#That may be enough, but you can define a variable that can describe
better the problem (optional)
ThreshDesc[UnionDC-atworkInternets1]: "Alert with
UnionDC-atworkInternets1"
#Now you can see the .bat files
 
Title[UnionDC-atworkInternets1]: UnionDC - @home Internet Router
Serial2/0
PageTop[UnionDC-atworkInternets1]: <H1>UnionDC - @home Internet Router
Serial2/0</H1>
 <TABLE>
   <TR><TD>Max Speed:</TD>  <TD>193.0 kBytes/s</TD></TR>
 </TABLE>
 
Now in the batch file.. as you can see I named it   "threshold.bat"
and it basically says
Now >> threshold.txt    "just trying to output to a file first" but if
anyone can help me with email option instead of output Option i would
greatly appreciate it
 
Also if you are wondering I am running the batch file from c:\mrtg\bin
that is where .cfg file is as well
 
thanks 
 
josh
 
P.S  I would like to thanks JB for getting me started with thresholds
 
 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi