[mrtg] Re: Ok, Thresholds and mailing --just noticed something

[Josh Goldfarb]

For the rrdusers.. I would really appreciate some help on this one
 
With this original message i tried to update the information and
realized with RRDTOOL with the thresholds in there it was confused and
wasn't updating them so i commented them out and that didn't work so i
had to reboot the management console box
 
any Ideas
 
thx
josh


 

		Ok now is my turn again for thresholds.. this time I
will paste a little piece of config file.
		 
		Target[UnionDC-atworkInternets1]: #Et2/0:monitor @
x.x.24.1: <mailto:#Et2/0:monitor @ x.x.24.1:> 
		SetEnv[UnionDC-atworkInternets1]:
MRTG_INT_IP="10.252.0.2" MRTG_INT_DESCR="Serial2/0"
		MaxBytes[UnionDC-atworkInternets1]: 193000
		ThreshMinI[UnionDC-atworkInternets1]: 12000
		# upper limit you don't want to be crossed for INPUT
traffic
		ThreshMaxI[UnionDC-atworkInternets1]: 17200
		# prog to run when any of the two limits is crossed
		ThreshProgI[UnionDC-atworkInternets1]: threshold.bat
		 
		# lower limit you don't want to be crossed for OUTPUT
traffic
		ThreshMinO[UnionDC-atworkInternets1]: 12000
		# upper limit you don't want to be crossed for OUTPUT
traffic
		ThreshMaxO[UnionDC-atworkInternets1]: 17200
		# prog to run when any of the two limits is crossed
		ThreshProgO[UnionDC-atworkInternets1]: threshold.bat
		#That may be enough, but you can define a variable that
can describe better the problem (optional)
		ThreshDesc[UnionDC-atworkInternets1]: "Alert with
UnionDC-atworkInternets1"
		#Now you can see the .bat files
		 
		Title[UnionDC-atworkInternets1]: UnionDC - @home
Internet Router Serial2/0
		PageTop[UnionDC-atworkInternets1]: <H1>UnionDC - @home
Internet Router Serial2/0</H1>
		 <TABLE>
		   <TR><TD>Max Speed:</TD>  <TD>193.0 kBytes/s</TD></TR>
		 </TABLE>
		 
		Now in the batch file.. as you can see I named it
"threshold.bat"   and it basically says
		Now >> threshold.txt    "just trying to output to a file
first" but if anyone can help me with email option instead of output
Option i would greatly appreciate it
		 
		Also if you are wondering I am running the batch file
from c:\mrtg\bin   that is where .cfg file is as well
		 
		thanks 
		 
		josh
		 
		P.S  I would like to thanks JB for getting me started
with thresholds
		 
		 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi