[mrtg] Please Help : cisco conf

[Stuart Clark]

Hi,
I am trying to get my cisco 3620 to talk to mrtg.
I want to get traffic/load statistics
When i run cfgmaker i get the error status: noSuchName

./cfgmaker --global  'WorkDir: /home/mrtg/public_html'  --output
/home/mrtg/public_html/mrtg.cfg  public at spacelink.spacelink.com.au

I'm also not sure whether to use traps of informs in the config
Can you please help?

here is my cisco config

snmp-server enable traps snmp authentication linkdown linkup coldstart
warmstart
snmp-server enable traps casa
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps isdn chan-not-avail
snmp-server enable traps hsrp
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps ipmulticast
snmp-server enable traps msdp
snmp-server enable traps rsvp
snmp-server enable traps frame-relay
snmp-server enable traps syslog
snmp-server enable traps rtr
snmp-server enable traps dlsw
snmp-server enable traps dial
snmp-server enable traps dsp card-status
snmp-server enable traps voice poor-qov
snmp-server enable traps xgcp
snmp-server host 61.12.108.13 public

Thanks
Stu


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi