[mrtg] Re: Please Help : cisco conf

[David Sawyer]

Traps are only used with a NMS.

All you need to get MRTG working on the Cisco is...
#----- start
access-list 1 permit 10.10.10.1

snmp-server community public RO 1
snmp-server host 10.10.10.1 public
#------ end

Change 'public' to a different community string and '10.10.10.1' to your
MRTG host.

The access-list will restrict your router being polled to those devices in
the list.

HTH
Dave


> -----Original Message-----
> From:	Stuart Clark [SMTP:sclark at spacelink.com.au]
> Sent:	Monday, April 30, 2001 3:34 PM
> To:	mrtg at list.ee.ethz.ch
> Subject:	[mrtg] Please Help : cisco  conf
> 
> 
> Hi,
> I am trying to get my cisco 3620 to talk to mrtg.
> I want to get traffic/load statistics
> When i run cfgmaker i get the error status: noSuchName
> 
> ./cfgmaker --global  'WorkDir: /home/mrtg/public_html'  --output
> /home/mrtg/public_html/mrtg.cfg  public at spacelink.spacelink.com.au
> 
> I'm also not sure whether to use traps of informs in the config
> Can you please help?
> 
> 
> 
----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi