[mrtg] Re: temp monitoring config.

Paul C. Williamson pwilliamson at mandtbank.com
Thu Aug 30 19:35:05 MEST 2001


Jon,

What kind of system are you using as the monitoring platform? 

If *nix, can you run something like snmpget blah to obtain the results?
If Windows, can you either do an snmpget or use GetIf and get 
the result you are looking for?  I've often found loading the mibs 
just adds another step, further complicating matters that much 
more, so when trying to troubleshoot, you are always trying to 
figure out if you are querying the right MIB value in the first place.
Plus, it adds another layer of loading, so it conceivably slows 
down the whole process anyway.

Paul

>>> Jon Robbins <jono at noof.com> 08/30/01 12:30PM >>>

Hello again..  
I don't think anyone is using the device I am, so I am just going to post
the request again along with the config and error..

My config:
{
Options[_]: growright,gauge
LoadMIBS: e:\mrtg\cfg\temp\sensorsoft1.mib

######################################################################
# System: MSS_5236B8
# Description: Lantronix MSS100 Version V3.6/3(000201)
# Contact: MIS
# Location: Main Computer Room
######################################################################


### Interface 1 >> Descr: 'Lantronix Ethernet 802.3' | Name: '' | Ip:
'10.10.3.200' | Eth: '00-80-a3-52-36-b8' ###

Target[10.10.3.200_1]:
1.3.6.1.4.912.1.10.0&1.3.6.1.4.912.1.15.0:public at 10.10.3.200: 
SetEnv[10.10.3.200_1]: MRTG_INT_IP="10.10.3.200" MRTG_INT_DESCR="Lantronix
Ethernet 802.3"
MaxBytes[10.10.3.200_1]: 1250000
Title[10.10.3.200_1]: Temp Analysis for 1 -- MSS_5236B8
PageTop[10.10.3.200_1]: <H1>Temp Analysis for 1 -- MSS_5236B8</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>MSS_5236B8 in MSS100</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>MIS</TD></TR>
   <TR><TD>Description:</TD><TD>Lantronix Ethernet 802.3  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.10.3.200 ()</TD></TR>
 </TABLE>
}

and the error:
{
E:\mrtg\bin>perl mrtg e:\mrtg\cfg\temp\comptemp.cfg
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.4.912.1.10.0)
SNMPv1_Session (remote host: "10.10.3.200" [10.10.3.200].161)
                  community: "public"
                 request ID: 289278793
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at E:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 450
SNMPGET Problem for 1.3.6.1.4.912.1.10.0 1.3.6.1.4.912.1.15.0 sysUptime
sysName
on public at 10.10.3.200: 
 at mrtg line 1485
WARNING: Expected a number but got ''
WARNING: Expected a number but got ''

E:\mrtg\bin>
}

as it appears to me, that it cannot find the proper OID or isn't even
loading the MIB in the first place..  

anyhelp would be greatly appreciated..


Thank you,

Jon B. Robbins
MIS Director
the Erotic Networks
New Frontier Media, Inc.
303.786.8700	extension 110
303.938.8388	facsimile 
303.818.0363	mobile hand held device
Short Text Email for emergencies pagejono at noof.com 
<mailto:pagejono at coloradosat.com> 
AOL IM ID ( jonorator )
MSN IM ID (jonorator at hotmail.com)
"NASCAR.  Go FAAASSST, Turn Left."


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list