[mrtg] Re: temp monitoring config.
Jon Robbins
jono at noof.com
Thu Aug 30 21:48:35 MEST 2001
I am an idiot, you are a god, Garth.. I'm not worthy..
Thank you,
Jon Robbins
Remember, NASCAR is a real sport.
-----Original Message-----
From: garth at netscape.com [mailto:garth at netscape.com]
Sent: Thursday, August 30, 2001 1:52 PM
To: Jon Robbins
Subject: RE: [mrtg] Re: temp monitoring config.
Hi Jon.
I run SNMP4tPC.
Getif is on the Helpful Links Page (First entry on Free SNMP Utilities).
You download, unzip and run it. It will install. Then you need to copy the
PERFMIB.MIB from SNMP4NT to the MIBS subdir of getif. Delete the .index
file in that dir, and start Getif. The you should be able to browse to the
MS branch.
SNMP of course, must be installed and configured on the desired targets.
I am going to re-vamp the site soon, and hope to clean it up a bit, and add
a search page :)
Garth
-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Jon Robbins
Sent: Thursday, August 30, 2001 12:33 PM
To: MRTG List Server (E-mail)
Subject: [mrtg] Re: temp monitoring config.
Paul,
Thanks for your reply again..
The snmp4tpc is an excellent resource.. I don't see GETIF and I don't see a
search page..
My NT 4 box just doesn't seem to have the snmp stuff I need, so maybe I'll
load this snmp4tpc util instead.. my management and sensorsoft temp mib can
walk the tree and show me the variables I want..
I just installed the snmp4tpc, but I don't see how to run GETIF.. is this
suppose to be an executable?
Thanks,
Jon.
Why isn't snmpget executable? You should really get GETIF.
It helps me out tons. Have you seen http://www.wtcs.org/snmp4tpc ?
You can download GETIF from there. In the meantime, what
happens when you try to run snmpget? Can you run snmpwalk?
It sounds like something may be wrong with the resource kit
installation.
Also, try to post replies back to the list. It helps with archives
and later problem resolution for other people searching the
archives.
Paul
Thanks for replying Paul..
It is NT 4. server..
Where do I get the complete snmpget syntax.. I have resource kit loaded,
but snmpget is not an executable..
Thank you,
Jon Robbins
Remember, NASCAR is a real sport.
-----Original Message-----
From: Paul C. Williamson [mailto:pwilliamson at mandtbank.com]
Sent: Thursday, August 30, 2001 11:35 AM
To: mrtg at list.ee.ethz.ch; Jon Robbins
Subject: [mrtg] Re: temp monitoring config.
Jon,
What kind of system are you using as the monitoring platform?
If *nix, can you run something like snmpget blah to obtain the results?
If Windows, can you either do an snmpget or use GetIf and get
the result you are looking for? I've often found loading the mibs
just adds another step, further complicating matters that much
more, so when trying to troubleshoot, you are always trying to
figure out if you are querying the right MIB value in the first place.
Plus, it adds another layer of loading, so it conceivably slows
down the whole process anyway.
Paul
>>> Jon Robbins <jono at noof.com> 08/30/01 12:30PM >>>
Hello again..
I don't think anyone is using the device I am, so I am just going to post
the request again along with the config and error..
My config:
{
Options[_]: growright,gauge
LoadMIBS: e:\mrtg\cfg\temp\sensorsoft1.mib
######################################################################
# System: MSS_5236B8
# Description: Lantronix MSS100 Version V3.6/3(000201)
# Contact: MIS
# Location: Main Computer Room
######################################################################
### Interface 1 >> Descr: 'Lantronix Ethernet 802.3' | Name: '' | Ip:
'10.10.3.200' | Eth: '00-80-a3-52-36-b8' ###
Target[10.10.3.200_1]:
1.3.6.1.4.912.1.10.0&1.3.6.1.4.912.1.15.0:public at 10.10.3.200:
SetEnv[10.10.3.200_1]: MRTG_INT_IP="10.10.3.200" MRTG_INT_DESCR="Lantronix
Ethernet 802.3"
MaxBytes[10.10.3.200_1]: 1250000
Title[10.10.3.200_1]: Temp Analysis for 1 -- MSS_5236B8
PageTop[10.10.3.200_1]: <H1>Temp Analysis for 1 -- MSS_5236B8</H1>
<TABLE>
<TR><TD>System:</TD> <TD>MSS_5236B8 in MSS100</TD></TR>
<TR><TD>Maintainer:</TD> <TD>MIS</TD></TR>
<TR><TD>Description:</TD><TD>Lantronix Ethernet 802.3 </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>10.10.3.200 ()</TD></TR>
</TABLE>
}
and the error:
{
E:\mrtg\bin>perl mrtg e:\mrtg\cfg\temp\comptemp.cfg
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.4.912.1.10.0)
SNMPv1_Session (remote host: "10.10.3.200" [10.10.3.200].161)
community: "public"
request ID: 289278793
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at E:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 450
SNMPGET Problem for 1.3.6.1.4.912.1.10.0 1.3.6.1.4.912.1.15.0 sysUptime
sysName
on public at 10.10.3.200:
at mrtg line 1485
WARNING: Expected a number but got ''
WARNING: Expected a number but got ''
E:\mrtg\bin>
}
as it appears to me, that it cannot find the proper OID or isn't even
loading the MIB in the first place..
anyhelp would be greatly appreciated..
Thank you,
Jon B. Robbins
MIS Director
the Erotic Networks
New Frontier Media, Inc.
303.786.8700 extension 110
303.938.8388 facsimile
303.818.0363 mobile hand held device
Short Text Email for emergencies pagejono at noof.com
<mailto:pagejono at coloradosat.com>
AOL IM ID ( jonorator )
MSN IM ID (jonorator at hotmail.com)
"NASCAR. Go FAAASSST, Turn Left."
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
---
Incoming mail is determined to be virus free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.265 / Virus Database: 137 - Release Date: 7/18/01
---
Outgoing mail is determined to be virus free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.265 / Virus Database: 137 - Release Date: 7/18/01
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list