[mrtg] Re: Nortel router cpu utilization

[Sawyer, David]

Have you tried...

Target[green] OID1&OID2:public at 1.1.1.1  /  OID3&OID4:public at 1.1.1.1




-----Original Message-----
From: lindsay.hunt at power.alstom.com
[mailto:lindsay.hunt at power.alstom.com]
Sent: 03 December 2001 14:29
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Nortel router cpu utilization



Hello,

Does anyone know if you can divide one oid by another in MRTG? I manage
Nortel routers and have determined that Nortel calculates cpu utilization
by dividing cpu used by cpu max.  Cpu used and cpu max both have a
corresponding oid.  Unfortunately, the cpu max value changes over time as
it is reported in centiseconds.  I could set a value for MaxBytes that
would always be greater than Cpu max but would prefer to divide one oid by
the other as this would produce the most accurate value. Thanks for your
help.

Lindsay Hunt


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi