[mrtg] Re: APC UPS Powernet Web management card

[Paul C. Williamson]

Changing from the OID to the MIB only adds complexity.  Only go to 
there once the OID is working properly.  There's really no technical 
reason to use it.  Just easier on readability of the config.  It actually adds overhead because you need to load the MIB in order to 
run the query.

As for gauge, that is most likely it. The best way to determine that 
is to look at the log file.  If the first line is populated and all the 
rest are zeros, it indicates you should probably use gauge (if it 
works from the command line).

Paul 

>>> "Chirhart, Brian" <bchirhart at fnni.com> 12/11/01 03:22PM >>>
Currently I use just the Oid, but I was going to try the MIB since it was
not working.  

As for Guage - only on the Load section - could that be it?

-----Original Message-----
From: Paul C. Williamson [mailto:pwilliamson at mandtbank.com] 
Sent: Tuesday, December 11, 2001 2:21 PM
To: Chirhart, Brian; mrtg at list.ee.ethz.ch 
Subject: Re: [mrtg] APC UPS Powernet Web management card


If you use MRTG, do you use gauge?  

As for loadMIBs, why are you doing that?  Do you use the 
MIB in the target line or the OID?

Paul

>>> "Chirhart, Brian" <bchirhart at fnni.com> 12/11/01 03:10PM >>>

> Hello everyone -
> 
> I have a lot of Oid's for APC UPS devices, but when I try to graph them
> using MRTG or STG I get flatlines, but if I try a MIB Browser, like GetIF,
> I can get the values and graph them.  Any ideas why I wouldn't be able to
> do it in MRTG?
> 
> For example:
> Battery Capacity - 1.3.6.1.4.1.318.1.1.1.2.2.1.0
> Temperature - 1.3.6.1.4.1.318.1.1.1.2.2.2.0
> Input Voltage - 1.3.6.1.4.1.318.1.1.1.3.2.1.0
> Frequency - 1.3.6.1.4.1.318.1.1.1.3.2.4.0
> 
> The crazy thing is that I CAN get Load which is:
> 1.3.6.1.4.1.318.1.1.1.4.2.3.0
> 
> Also - when using the LoadMIBs line do I want to specify a specific MIB or
> just the directory it resides in?
>  
> Thx -
> Brian


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi