[mrtg] Re: Graphing a "Time" response.

[Chirhart, Brian]

This is working great Paul - 

For others looking for this info...
The UPDATA01.PL script in /contrib/apc_ups/

Had to open the perl script and replace server with IP and community with
public. - Target line looks like: Target[X.X.X.X_Load]:
`c:\mrtg\bin\upsdata01.pl`

-----Original Message-----
From: Paul C. Williamson [mailto:pwilliamson at mandtbank.com]
Sent: Monday, December 17, 2001 1:03 PM
To: Chirhart, Brian; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Graphing a "Time" response.



There are a number of scripts that do this...APC scripts and the 
ping-probe script come to mind.  As long as you set it up as 
a gauge, and verify the format (i.e. - 00:56:32 vs. 3392) returned 
by the oid is correct, the script should be easy.

Paul

>>> "Chirhart, Brian" <bchirhart at fnni.com> 12/17/01 12:43PM >>>

This might be out of the scope of MRTG - I know it is not "designed" to do
this, but I was wondering if anyone has ever successfully graphed an Oid
that responds with a time - for example, Time reamining on a battery is :
00:56:32.  Is there any way I can convert this so that MRTG will graph 56
minutes?

Any help would be greatly appreciated!!
Brian Chirhart -


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi