[mrtg] errors on upgrade

[M. DeWar]

The machine I was running MRTG on crashed so I had to redo it.
I put Windows 2000 SR 1 and upgraded to ActivateSTate Perl 5.6 and now when I run MRTG I get abunch of errors about empty compiling and some lib not found. (Sorry I am not in front of the machine now to get give it exactly)
I searched the archives but did not find any answers but I could have been searching with the wrong keywords.
Anyone have any clues or idea's on whats happening. ? The MRTG version is 2.9.7 downloaded from the MRTG site.

Thanks
Mark

---------- Original Message ------------------------
From: Stephen Smith <SSmith at CTIAlliance.com>

Date: Thu, 1 Feb 2001 10:32:32 -0700 


I have configured MRTG to show me the traffic patterns on 2 Cisco 2501s
running IOS 12.0

I am getting good graphs but I am a bit confused on how to read my graphs.

Each interface is configured like so

### Interface 5 >> Descr: 'Serial0.1' | Name: 'Se0.1' | Ip: '' | Eth: '' ###

Target[##.##.###.##_#]: 5:group@##.##.###.##:
SetEnv[##.##.###.##_#]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0.1"
MaxBytes[##.##.###.##_#]: 32000
Title[10.##.##.###.##_#]: Traffic Analysis for 5 -- routername
PageTop[##.##.###.##_#]: <H1>Traffic Analysis for 5 -- routername</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>routername in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0.1 connected to routername </TD></TR>
   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0.1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>250.0 kb/s</TD></TR>
 </TABLE>

What is the best way to configure this to represent my 256k frame-relay
links in the graph?
I use 32000 at instructed.
When I view my graphs, they read on the left hand side: bytes per second and
then
6.0k
4.5k
3.0k
1.5k
MAXIN 5956.0 B/s (18.6%) 
MAXOUT 5956.0 B/s(17.8%) 
My graph peaks between 1.5 and 3.0
Does my configuration look correct?



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi