[mrtg] Re: Monitoring SQL

[Adrian Mink]

I have tried it both ways, still get the same error. Here is the error:

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID:
1.3.6.1.4.1.311.1.4.1.1.2.1.4.10.83.73.84.69.83.69.82.86.69.82)
SNMPv1_Session (remote host: "192.168.35.27" [192.168.35.27].161)
                  community: "public"
                 request ID: 1691133229
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for
1.3.6.1.4.1.311.1.4.1.1.2.1.4.10.83.73.84.69.83.69.82.86.69.
82 1.3.6.1.4.1.311.1.4.1.1.2.1.4.10.83.73.84.69.83.69.82.86.69.82 on
public at 192.
168.35.27

Works just fine from the command line doing a snmpwalk. Same error though
from the command line doing a snmpget. 


-----Original Message-----
From: Daniel J McDonald [mailto:dmcdonald at digicontech.com]
Sent: Tuesday, February 13, 2001 3:46 PM
To: 'Adrian Mink'
Subject: RE: [mrtg] Re: Monitoring SQL


you don't need the final .0  The instance in this case is "SITESERVER", or
.10.83.73.84.64.83.69.82.86.69.82

> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch
> [mailto:mrtg-bounce at list.ee.ethz.ch]On
> Behalf Of Adrian Mink
> Sent: Tuesday, February 13, 2001 3:38 PM
> To: Mrtg (E-mail)
> Subject: [mrtg] Re: Monitoring SQL
>
>
>
> Still dies. I put in
> Target[SITESERVER]:1.3.6.1.4.1.311.1.4.1.1.2.1.4.10.83.73.84.6
> 9.83.69.82.86.
> 69.82.0&1.
> 3.6.1.4.1.311.1.4.1.1.2.1.4.10.83.73.84.69.83.69.82.86.69.82.0
> :public at 192.16
> 8.35.27 .
>
> I get a no such name error. But if I do a snmpwalk on
> 1.3.6.1.4.1.311.1.4.1.1.2.1.4
> it works. Sigh. Anyone have any more ideas? Thanks.
>
> -----Original Message-----
> From: Daniel J McDonald [mailto:dmcdonald at digicontech.com]
> Sent: Tuesday, February 13, 2001 3:21 PM
> To: 'Adrian Mink'
> Subject: RE: [mrtg] Re: Monitoring SQL
>
>
> you need to use the full instance:
>
> target[sqlinfo]:
> .1.3.6.1.4.1.311.1.4.1.1.2.1.4.10.83.73.84.69.83.69.82.86.69.82&
> ..
>
>
> The name of the service you are querying is SITESERVER.
> Would be nice if
> mrtg had a way to encode these string for us...
>
>
> <snip>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi