[mrtg] HP ProCurve 10BT Problems

[Steve Jarrell]

Follow up...

Although the documentation says that the second and third numbers on the first line of the log are bytes in and bytes out, in my case they're actually IfInOctets.1 and IfOutOctets.1. Here's a dump of the log file after about an hour of running. Any suggestions?

982263908 2941270 2269438
982263908 1 0 1 0
982263608 0 0 0 0
982263600 0 0 0 0
982263300 2 2 102 107
982263000 115 120 599 611
982262700 588 600 599 611
982262400 190 195 196 201
982262100 0 0 1 0
982261800 0 0 1 0
982261500 1 0 7 0
982261200 10 9 135 344
982260900 131 334 135 344
982260600 0 0 1 0
982260300 0 0 1 0
982260000 0 0 0 0
982259700 0 0 0 0
982259400 0 0 1 0
982259100 1 0 1 0
982258800 0 0 1 1
982258500 0 0 67 81


Thanks,

Steve
========================================================

I'm trying to setup a HP Procurve 10BT managed hub to simply report bandwidth usage, but I'm not having any luck. I've run cfgmaker and it found the hub and created the .cfg file successfully using the ip and community name that I provided, however, the values in the .log file don't seem to be right.

The hub only has 2 ports being used. Port 1 is our connection to the ISP switch (we're limited right now to 1Mbps), and Port 2 is connected to our firewall. Following is the first few lines of the .log file, and the first few lines of the .cfg file. myhub has been substituted for my hub's community name, and 111.111.111.111 has been substituted for the ip address. At the time that log file was written, our actual usage was somewhere around 256Kbs. I don't think it makes a difference, but I have deleted the "public" community name and added my own community name for security purposes, but mrtg seems to be able to find the hub fine with my name.

As you can see,the log shows 2295716 incoming bytes, and 1691849 outgoing bytes instead of the actual +- 256kbs. Obviously I'm getting bogus numbers somehow. Any help would be greatly appreciated.

Log:

982251238 2295716 1691849
982251238 67 81 67 81
982251236 3 2 449 279

mrtg.cfg:

# Created by 
# cfgmaker MyHub at 111.111.111.111 --global 'Workdir: d:\web\mrtg' --output mrtg.cfg

Workdir: d:\web\mrtg

######################################################################
# System: VisualTour Main Hub
# Description: HPJ3301A 10Base-T Hub-12M, ROM A.01.00, EEPROM A.02.02, HW A.01.00
# Contact: Steve Jarrell
# Location: Verio - Boca Raton, FL
######################################################################


### Interface 1 >> Descr: 'ei0 HP Ethernet Repeater Agent Network Interface' | Name: 'ei0' | Ip: '111.111.111.111' | Eth: '00-01-e6-29-f9-d4' ###

Target[111.111.111.111_1]: 1:MyHub at 111.111.111.111
MaxBytes[111.111.111.111_1]: 1250000
Title[111.111.111.111_1]: Traffic Analysis for 1 -- VisualTour Main Hub


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi