[mrtg] MRTG Error on Frame Relay Subinterface

Knill, David David.Knill at Netigy.com
Tue Feb 20 20:22:58 MET 2001


MRTG is having trouble gathering statistics from a Frame Relay subinterface
on one of our Cisco 7576 routers. I confirmed that the SNMP index for this
subinterface (28) is correct. Any Hints on how I can resolve this issue?
Pertinent information included below:

MRTG is writing the following to the first line of the log file every time
it runs:

982695602 #<unprintable BER type 0x81> #<unprintable BER type 0x81>

-------------------------------------------------------------------------
ERROR MESSAGE:
-------------------------------------------------------------------------
Rateup ERROR: /opt/mrtg/mrtg-2.9.7/bin/rateup found <ROUTERNAME>_28's log
file was corrupt or not in sorted order:
time: 982295101.Rateup WARNING: /opt/mrtg/mrtg-2.9.7/bin/rateup could not
read the primary log file for <ROUTERNAME>_28

time: 982295101.Rateup WARNING: /opt/mrtg/mrtg-2.9.7/bin/rateup The backup
log file for <ROUTERNAME>_28 was invalid as well

WARNING: rateup died from Signal 0
 with Exit Value 1 when doing router '<ROUTERNAME>_28'
 Signal was 0, Returncode was 1

-------------------------------------------------------------------------
RELEVANT MRTG.CFG
-------------------------------------------------------------------------
### Interface 28 >> Descr: 'Serial5/0/1.1' | Name: '' | Ip:
'xxx.xxx.xxx.xxx' | Eth: '' ###

Target[<ROUTERNAME>_28]: 28:COMMSTRING@<ROUTERNAME>:::::2
SetEnv[ROUTERNAME_28]: MRTG_INT_IP="xxx.xxx.xxx.xxx"
MRTG_INT_DESCR="Serial5/0/1.1"
MaxBytes[<ROUTERNAME>_28]: 5526250
Title[<ROUTERNAME>_28]: Traffic Analysis for 28 -- <ROUTERNAME>
PageTop[<ROUTERNAME>_28]: <H1>Traffic Analysis for <ROUTERNAME> - Interface
Serial5/0/1.1</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD><ROUTERNAME> </TD></TR>
   <TR><TD>Maintainer:</TD> <TD>IP Network Operations </TD></TR>
   <TR><TD>Interface:</TD>  <TD>Serial5/0/1.1</TD></TR>
#   <TR><TD>Test Field:</TD> <TD>ROUTERNAME</TD></TR>
#   <TR><TD>Description:</TD><TD>Serial5/0/1.1  </TD></TR>
#   <TR><TD>ifType:</TD>     <TD>frame-relay (32)</TD></TR>
#   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>44.2 Mbits/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>xxx.xxx.xxx.xxx()</TD></TR>
 </TABLE>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list