[mrtg] Re: Reverse Option (Not Working)

[Lubna Sorour]

use:               -9007:public at 172.16.0.254
instead of :    -1:9007:public at 172.16.0.254

Regards
Lubna Sorour
----- Original Message ----- 
From: "Jim Hunt" <jhunt at hse.k12.in.us>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, February 23, 2001 4:08 PM
Subject: [mrtg] Reverse Option (Not Working)




This is the first time I have tried to use the reverse option on a target.
The .cfg file works fine until I use the "-1:" to reverse the stats.  My
error is a "no response" from target.  (It does work without the reverse
option.)

Here is the .cfg file that doesn't work:

### Interface 9007 >> Descr: '' | Name: '' | Ip: '' | Eth:
'00-d0-95-0e-16-f6' ###

Target[172.16.0.254_9007]: -1:9007:public at 172.16.0.254
SetEnv[172.16.0.254_9007]: MRTG_INT_IP="" MRTG_INT_DESCR=""
MaxBytes[172.16.0.254_9007]: 12500000
Title[172.16.0.254_9007]: Traffic Analysis for 9007 -- OSR-ADMIN-WAN
PageTop[172.16.0.254_9007]: <H1>Traffic Analysis for 9007 --
OSR-ADMIN-WAN</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>OSR-ADMIN-WAN in OSR-ADMIN-WAN</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Jay R. Denney</TD></TR>
   <TR><TD>Description:</TD><TD>  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
 </TABLE>



Jim Hunt
Microsoft Certified Systems Engineer
Microsoft Network Analyst and Senior Network Administrator
Hamilton Southeastern School Corporation

My MRTG:  http://204.180.37.238/mrtg


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi