[mrtg] Re: Problem with Graphing Processor Load for AS/400

[Alex van den Bogaerdt]

Sumeet Parashar wrote:

> #snmpget 10.170.161.211 public .1.3.6.1.2.1.25.3.3.1.2.2
> host.hrDevice.hrProcessorTable.hrProcessorEntry.hrProcessorLoad.2 = 37

hrProcessorLoad.2 is working ...

> Target[x]: hrProcessorLoad.0&hrProcessorLoad.2

... and this receives an error.  The logical conclusion
is that hrProcessorLoad.0 is wrong.  Try snmpwalk on 
host.hrDevice.hrProcessorTable.hrProcessorEntry.hrProcessorLoad
and see which instances are there.  If it is a dual processor system,
the instances will most likely be 1 and 2, not 0 and 2.

HTH
-- 
   __________________________________________________________________
 / alex at slot.hollandcasino.nl                  alex at ergens.op.het.net \
| work                                                         private |
| My employer is capable of speaking therefore I speak only for myself |
+----------------------------------------------------------------------+
| Technical questions sent directly to me will be nuked. Use the list. | 
+----------------------------------------------------------------------+
| http://faq.mrtg.org/                                                 |
| http://rrdtool.eu.org  --> tutorial                                  |
+----------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi