[mrtg] Re: MIB info

[Alex van den Bogaerdt]

art news wrote:

> 1	Cisco web link gives a big list of supported MIBs in routers and switches. 
> Can we configure any MIB to work with MRTG?

In principle: yes.  However, the file needs to be correct in order to be
included in MRTG.  Note that you don't need to load a mib.

> 2	How to relate the MIB CISCO-FRAME-RELAY-MIB.my to its corresponding number 
> like 1.3.6.1.2.1.10.32.2. Is this necessary or there is no need for it.

You need to know the textual representation of the complete OID (+instance)
if you imported the mib into MRTG.  You can also convert the textual representation
to the OID yourself and enter the numbers.
In both cases, knowing "CISCO-FRAME-RELAY-MIB.my" is not enough.

There are some pieces of information on the faq page, along with some pointers
to snmp-related sites.  Your question has nothing to do with MRTG itself, the
knowledge you seek is asumed to be known if you start with MRTG.

The main page of the faq is at http://faq.mrtg.org/
First follow the link to snmp, then go back to the main page and
follow the link to the links page.  On this link page, start with
the RRDtool tutorial.  There is some information on snmp in there too.

> 3	How can I use config maker to get information about desired MIB? If not 
> then what’s the manual way.

I don't know for sure (didn't touch cfgmaker for a ***looooong*** time)
but I think it isn't possible to configure it using a mib file.

HTH
-- 
   __________________________________________________________________
 / alex at slot.hollandcasino.nl                  alex at ergens.op.het.net \
| work                                                         private |
| My employer is capable of speaking therefore I speak only for myself |
+----------------------------------------------------------------------+
| Technical questions sent directly to me will be nuked. Use the list. | 
+----------------------------------------------------------------------+
| http://faq.mrtg.org/                                                 |
| http://rrdtool.eu.org  --> tutorial                                  |
+----------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi