[mrtg] Problems with Cisco 2924C

Bob Van Cleef vancleef at microunity.com
Fri Jun 15 22:31:37 MEST 2001



I have four cisco WS-C2924C-XL routers.  One is an older model (deeper
case) and older OS version:  11.2 vs 12.0 in the newer models.

I'm having now problems getting stats from the three newer units, but the
older one doesn't seem to want to respond consistantly. The configuration
files are basically identical.

I've played a bit with the MaxBytes entry and other things.  Every now and
again I get data, but most of the time it reports very low values.  (see
log extract at the end).

Clues on how to troubleshoot this would be appreciated.  mrtg does not
report any errors and only reports starting time with the --logging
option set.  (MRTG 2.9.17)  Note: right now it appears to be working
again, but I don't know that I have changed anything... other than
to stop manually running mrtg to test it - could too frequently
running mrtg cause these symptoms?)

Bob
-----------------------------------------------------------------------
Older Unit: cisco-1

### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' |
Eth: '00-90-ab-f4-9c-01' ###

Target[cisco-1_2]: 2:public at cisco-1:
SetEnv[cisco-1_2]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet0/1"
MaxBytes[cisco-1_2]: 1250000
Title[cisco-1_2]: Traffic Analysis for Port 1 - cisco-1
PageTop[cisco-1_2]: <H1>Traffic Analysis for Port 1 - cisco-1</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>cisco-1 in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
 </TABLE>
-----------------------------------------------------------------------
Newer (working) Unit: cisco-4

### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' |
Eth: '00-01-42-c7-97-c1' ###

Target[cisco-4_2]: 2:public at cisco-4
SetEnv[cisco-4_2]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet0/1"
MaxBytes[cisco-4_2]: 1250000
Title[cisco-4_2]: Traffic Analysis for Port 1 -- cisco-4
PageTop[cisco-4_2]: <H1>Traffic Analysis for Port 1 -- cisco-4</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>cisco-4 in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0/1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0/1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
 </TABLE>
-----------------------------------------------------------------------
vancleef [641] > cat cisco-1_2.log
992636403 1458129550 830788441
992636403 0 20 0 20
992636104 0 20 0 20
992636100 18346 20 1834636 20
992635800 1810174 20 1834636 20
992635500 0 20 0 20
992635200 0 20 0 20
992634900 0 20 0 21
992634600 0 19 0 22
992634300 0 20 0 20
992634000 0 20 0 20
992633700 0 20 0 20
992633400 0 20 0 20
992633100 0 20 0 20
992632800 0 20 0 20
992632500 0 20 0 20
992632200 0 20 0 20
992631900 0 20 0 20
992631600 0 20 0 20
992631300 0 20 0 20
992631000 0 20 0 20
992630700 0 20 0 20
992630400 0 19 0 20
[snip]



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list