[mrtg] Re: mrtg behind checkpoint firewall

[David Sawyer]

You don't open ports on the host, you need to add a rule in the firewall.

For SNMP traffic enable UDP 161 (MRTG only uses this port), for SNMP traps
enable UDP 162.

Have a look at the following link to view other ports...

http://www.networkice.com/advice/Exploits/Ports/


> -----Original Message-----
> From:	KAUSHIK B (NETWORKING) [SMTP:kaushik at tatatechnologies.com]
> Sent:	Friday, June 22, 2001 6:13 AM
> To:	'mrtg at list.ee.ethz.ch'
> Subject:	[mrtg] mrtg behind checkpoint firewall
> 
> 
> I need to monitor cisco 2500's from a host which is behind the firewall .
> Can anyone tell me which ports have to opened on the host ( on which mrtg
> runs ) so that i can
> monitor the   routers .
> 
> 
----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi