[mrtg] Re: mrtg behind checkpoint firewall

KAUSHIK B (NETWORKING) kaushik at tatatechnologies.com
Fri Jun 22 10:21:40 MEST 2001

 i'll try that .
   i'll add a rule to open port 161and 162 for host on the firewall.

-----Original Message-----

From: David Sawyer

To: 'KAUSHIK B (NETWORKING)'; 'mrtg at list.ee.ethz.ch'

Sent: 6/22/01 1:47 PM

Subject: RE: [mrtg] mrtg behind checkpoint firewall

You don't open ports on the host, you need to add a rule in the


For SNMP traffic enable UDP 161 (MRTG only uses this port), for SNMP


enable UDP 162.

Have a look at the following link to view other ports...


> -----Original Message-----

> From:	KAUSHIK B (NETWORKING) [SMTP:kaushik at tatatechnologies.com]

> Sent:	Friday, June 22, 2001 6:13 AM

> To:	'mrtg at list.ee.ethz.ch'

> Subject:	[mrtg] mrtg behind checkpoint firewall



> I need to monitor cisco 2500's from a host which is behind the

firewall .

> Can anyone tell me which ports have to opened on the host ( on which


> runs ) so that i can

> monitor the   routers .





The information contained in this e-mail is confidential and is intended

only for the named recipient(s). If you are not the intended recipient


must not copy, distribute, or take any action or reliance on it.

If you have received this e-mail in error, please notify the sender.

Any unauthorised disclosure of the information contained in this e-mail

is strictly prohibited.



Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list