[mrtg] Re: hwo to use cfgmaker

Mickey Coggins mick at psi.com
Mon Mar 12 07:43:27 MET 2001


Could it be either SNMP filters, or perhaps your community name
is not "public"?

Did you try running something like "snmpwalk public system"
to see if it says:

Timeout: No Response from

If so, probably just the wrong community, assuming there are no filters.


At 06:03 12-03-01, Rick Yu wrote:

>  I have installed mrtg, but i can not config it, my gateway is,
>but when i run 
>  ./cfgmaker --global 'WorkDir: /www/htdocs/mrtg' --global 'Options[_]: bits,growright' --output /home/mrtg/cfg/mrtg.cfg
>  It display,
>  --base: Get Device Info on public at
>SNMP Error:
>no response received
>SNMPv1_Session (remote host: "" [].161)
>                  community: "public"
>                 request ID: 1433849831
>                PDU bufsize: 8000 bytes
>                    timeout: 2s
>                    retries: 5
>                    backoff: 1)
>SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on public at
>--base: Vendor Id: 
>--base: Populating confcache
>  Then I try some other routers, such as the routers showed on www.mrtg.org, but I failed,
>  Why?
>  Thanks,

Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

More information about the mrtg mailing list