[mrtg] Re: oid for temperature on a cisco 6509?
john.hoffman at za.pwcglobal.com
john.hoffman at za.pwcglobal.com
Tue Mar 13 08:45:24 MET 2001
Trever,
Not sure if you may have succeeded in obtaining the answer to you're
question. (I have been away - thus the late reply). I spent quiet some
time looking for the same answer the other day and managed to get the
following using CiscoWorks 2000 and SNMPGET.
Cisco IOS command # sh env temp
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.25 =
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.26 =
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.27 =
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.28 =
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.29 = VTT1 (Chassis Module)
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.30 =
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.31 = VTT2 (Chassis Module)
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.32 =
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.33 = VTT3 (Chassis Module)
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1001 = intake - slot1
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1002 = Exhaust - slot1
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1003 = device 1 - slot 1
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1004 = device 2 - slot 1
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1007 = intake - slot1 sw eng
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1008 = Exhaust - slot1 sw eng
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1009 = -
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.1010 = -
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.2001 = intake - slot2
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.2002 = Exhaust - slot2
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.2003 = device 1 - slot 2
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.2004 = device 2 - slot 2
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.3001 = intake - slot4
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.3002 = Exhaust - slot4
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.3003 = device 1 - slot 4
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.3004 = device 2 - slot 4
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.4001 = intake - slot5
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.4002 = Exhaust - slot5
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.4003 = device 1 - slot 5
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.4004 = device 2 - slot 5
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.5001 = intake - slot6
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.5002 = Exhaust - slot6
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.5003 = device 1 - slot 6
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.5004 = device 2 - slot 6
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.6001 = intake - slot7
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.6002 = Exhaust - slot7
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.6003 = device 1 - slot 7
.iso.3.6.1.4.1.9.9.91.1.1.1.1.4.6004 = device 2 - slot 7
Hope this helps.
Regards
John
Trever Furnish <trever at wowemployers.com> on 2001/03/05 11:18:16 PM
To: MRTG List <mrtg at list.ee.ethz.ch>
cc:
Subject: [mrtg] oid for temperature on a cisco 6509?
Size: 4 Kb
On our Cisco 7513 I was able to figure out that the following two OIDs give
some temperature data. However, even though my 6509 also show similar
output when I issue the "show environment all" EXEC command, I these oids
return no values. Is there another oid that works for the 6509?
Oids that work on the 7513:
.1.3.6.1.4.1.9.9.13.1.3.1.2.1 - RSP inlet temp in C.
.1.3.6.1.4.1.9.9.13.1.3.1.3.3 - RSP exhaust temp in C.
Anyone got anything similar for the 6509?
--
Trever Furnish, trever at wowemployers.com, 317.874.9055
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list