[mrtg] AW: Re: Newbie - Ascend

["Helmert, Jörg"]

Hi,

ascends have many interfaces. the physical ones and a lot of logical
wan<xxx> interfaces (e.g. wan55).

While someone is dialed in, the physical is "connected" to a logical one.
Traficcounters only work on the logical ones.

Be aware: where at the first call wan55 is used, any other number
can be seen for the next call.

To solve these odd problems, search for ascend in the list.
Numerous posts to these problems...

bye,

 Joerg Helmert

-----Ursprüngliche Nachricht-----
Von: Chris Marlow [mailto:marlowc at us.ibm.com]
Gesendet: Donnerstag, 22. März 2001 18:31
An: Evans Martin
Cc: mrtg at list.ee.ethz.ch
Betreff: [mrtg] Re: Newbie - Ascend




With MaxBytes set to 8000, anything over 8K is ignored... Try setting this
first to an abnormally high number (like 8000000000) Just to see if you
start getting numbers, then narrow it back down.

Let me know if it works

-Chris

-----
Christopher S. Marlow
AIX Infrastructure / 24x7 Security
Burlington, VT
Phone: 802-769-3253
Tie line: 446-3253
e-mail: marlowc at us.ibm.com


"Evans Martin" <evans at martek.net>@list.ee.ethz.ch on 03/22/2001 12:19:04 PM

Sent by:  mrtg-bounce at list.ee.ethz.ch


To:   <mrtg at list.ee.ethz.ch>
cc:
Subject:  [mrtg] Newbie - Ascend



I just installed mrtg, ran cfgmaker, edited the cfg file and don't show any
traffic on my graphs.  My router is slammed for most of the day so I should
see something.  Can anyone give me any pointers?

The produced html files are located at
http://matrix.martek.net/stats/mrtg/router.html.  Here is a snippet from my
cfg file:

# Created by
# /usr/local/bin/cfgmaker secret at 207.65.132.1

######################################################################
# System: posidon
# Description: Ascend Pipeline BRI S/N: 7026581 Software +6.0.9+
# Contact: evans at martek.net
# Location: Nashville, TN
######################################################################

### Interface 2 >> Descr: 'BRI Slot 1 Line 1' | Name: '' | Ip: '' | Eth: ''
###

WorkDir: /usr/local/www/data/stats/mrtg
RunAsDaemon:Yes
Interval:5
Options[_]: growright,bits

Target[router]: 2:secret at 207.65.132.1:
SetEnv[router]: MRTG_INT_IP="" MRTG_INT_DESCR="BRI Slot 1 Line 1"
MaxBytes[router]: 8000
Title[router]: Traffic Analysis For BRI Port Of Router
PageTop[router]: <H1>Traffic Analysis For BRI Port Of Router</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>Martek.Net in Nashville, TN</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Evans Martin - evans at martek.net</TD></TR>
   <TR><TD>Description:</TD><TD>BRI Slot 1 Line 1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>basicISDN (20)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>8000.0 Bytes/s</TD></TR>
 </TABLE>


Thanks in advance for the help,
Evans Martin

Martek Computer Co. / Martek.Net
Phone:  (615) 871-0711
Fax:  (615) 874-0931
Cell:  (615) 519-1879
Email:  evans at martek.net
Web:  http://www.martek.net

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi