[mrtg] Re: Cat 4003 temperature mibs

[Roth, Gabrielle]

> I ran the following script using "popular" temp mibs for Cisco, but
> unfortunately they are not accurate for the 4003 catalyst 
> switch series.

> Target[192.168.38.8]:.1.3.6.1.4.1.9.9.13.1.3.1.3.1&.1.3.6.1.4.
> 1.9.9.13.1.3.1.3.4:xxxxxxxxxxxx at 192.168.38.8* 1.8 + 32
> 

Bingo.  The OID you are using is from the CISCO-ENVMON-MIB, which AFAIK
isn't supported on the Catalyst switches.

The only temp OID I've found for the Catalyst switches is in the
CISCO-STACK-MIB, chassisTempAlarm.  It will always read either a 1, 2 or 3,
which is kinda boring.  I don't know if you can get a temperature
measurement off the Cats.  (If I'm wrong, somebody please speak up!)

gabrielle

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi