[mrtg] Re: Bay Switch ATM port monitoring

[Alex van den Bogaerdt]

Viraj Raut wrote:

> on this. The Token ring ports on the same switch give
> the graphs but the ATM ports show no traffic. However
> cfgmaker can identify the port as ATM and also get the
> speed of the ports ok. I have tried adding the mib
> using LoadMIBs:/<path name>/name.mib in the cfg file.

First try to find out if the switch returns valid data for those
ports.  Use another tool such as snmpget or snmputil.exe to query
the same ports.  If that doesn't return values, or if the returned
values do not increase as traffic is sent, there's nothing MRTG
can do about it.

HTH
-- 
   __________________________________________________________________
 / alex at slot.hollandcasino.nl                  alex at ergens.op.het.net \
| work                                                         private |
| My employer is capable of speaking therefore I speak only for myself |
+----------------------------------------------------------------------+
| Technical questions sent directly to me will be nuked. Use the list. | 
+----------------------------------------------------------------------+
| http://faq.mrtg.org/                                                 |
| http://rrdtool.eu.org  --> tutorial                                  |
+----------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi