[mrtg] Re: Blank graphs

Joe Strause strause at ceni.com
Thu Nov 15 15:34:34 MET 2001


That what I thought at first to, but I sure snmp v2 is turned on in the
Shasta and if I run cfgmaker without using v2, the only interface it finds
is the management ethernet interface.

Is there something else I have to setup to use snmp v2 w/ MRTG. Everything
else I monitor is snmp v1 and they all poll fine.

-----Original Message-----
From: Daniel J McDonald [mailto:dmcdonald at digicontech.com]
Sent: Thursday, November 15, 2001 9:34 AM
To: 'Joe Strause'
Subject: RE: [mrtg] Blank graphs


That error means that the Shasta box does not support SNMP V2.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Joe Strause
Sent: Wednesday, November 14, 2001 1:10 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Blank graphs


I am using MRTG to monitor a Shasta BSN 500 box. I ran cfgmaker and it found
all the interfaces but when I run the cfg, i get this error,
WARNING: Expected a number but got '#<unprintable BER type 0x80>'
and the graphs never show any usage.
I am using SNMP v2.
Below is part of my config, can anyone help explain this error and how to
fix it.
Thanks

### Interface 2 >> Descr: 'mgmt-eth0' | Name: '' | Ip: '192.168.12.254' |
Eth: '30-30-3a-39-30-3a-33-39-3a-62-33-3a-34-30-3a-30-30' ###

Target[192.168.12.254_2]: 2:public at 192.168.12.254:::::2
SetEnv[192.168.12.254_2]: MRTG_INT_IP="192.168.12.254"
MRTG_INT_DESCR="mgmt-eth0"
MaxBytes[192.168.12.254_2]: 12500000
Title[192.168.12.254_2]: Traffic Analysis for 2 -- ssg1
PageTop[192.168.12.254_2]: <H1>Traffic Analysis for 2 -- ssg1</H1>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list