[mrtg] Problems with Cellpipe and MRTG

Raymond Brighenti raymond.brighenti at trademark-design.com
Thu Nov 22 15:43:10 MET 2001


Hi people,

Currently have a Lucent DSL-Cell-50H (Rev 9.1-142.0 l.h50), and tried to use
cfgmaker on the box so I can monitor bandwidth in/out.

The box does respond but informs me that all interface "it is operationally
DOWN" or "has a speed of 0 which makes no sense" which is obviously wrong
cause the box is up and running fine.

Anyone know anything about these boxes that cause this?

Ta

Ray




### Interface 1 >> Descr: 'Console 2' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of 0 which makes no sense
#
# Target[IP.of.Pipeline_1]: 1:PassworD at IP.of.Pipeline:
# SetEnv[IP.of.Pipeline_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Console 2"
# MaxBytes[IP.of.Pipeline_1]: 0
# Title[IP.of.Pipeline_1]: Traffic Analysis for 1 --
# PageTop[IP.of.Pipeline_1]: <H1>Traffic Analysis for 1 -- </H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD> in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Console 2  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>rs232 (33)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 2 >> Descr: 'HDSL2 Slot 1 Line 1' | Name: '' | Ip: '' | Eth:
'' ###
### The following interface is commented out because:
### * it is operationally DOWN
### * has a speed of 0 which makes no sense
#
# Target[IP.of.Pipeline_2]: 2:PassworD at IP.of.Pipeline:
# SetEnv[IP.of.Pipeline_2]: MRTG_INT_IP="" MRTG_INT_DESCR="HDSL2 Slot 1 Line
1"
# MaxBytes[IP.of.Pipeline_2]: 0
# Title[IP.of.Pipeline_2]: Traffic Analysis for 2 --
# PageTop[IP.of.Pipeline_2]: <H1>Traffic Analysis for 2 -- </H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD> in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>HDSL2 Slot 1 Line 1  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> (168)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 3 >> Descr: '' | Name: '' | Ip: 'IP.of.Pipeline' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.3)
###     SNMPv1_Session (remote host: "IP.of.Pipeline" [IP.of.Pipeline].161)
###                       community: "PassworD"
###                      request ID: 1297677502
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[IP.of.Pipeline_3]: 3:PassworD at IP.of.Pipeline:
# SetEnv[IP.of.Pipeline_3]: MRTG_INT_IP="IP.of.Pipeline" MRTG_INT_DESCR=""
# MaxBytes[IP.of.Pipeline_3]: 0
# Title[IP.of.Pipeline_3]: Traffic Analysis for 3 --
# PageTop[IP.of.Pipeline_3]: <H1>Traffic Analysis for 3 -- </H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD> in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>IP.of.Pipeline ()</TD></TR>
#  </TABLE>


### Interface 16 >> Descr: '' | Name: '' | Ip: '127.0.0.2' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.16)
###     SNMPv1_Session (remote host: "IP.of.Pipeline" [IP.of.Pipeline].161)
###                       community: "PassworD"
###                      request ID: 1297677503
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[IP.of.Pipeline_16]: 16:PassworD at IP.of.Pipeline:
# SetEnv[IP.of.Pipeline_16]: MRTG_INT_IP="127.0.0.2" MRTG_INT_DESCR=""
# MaxBytes[IP.of.Pipeline_16]: 0
# Title[IP.of.Pipeline_16]: Traffic Analysis for 16 --
# PageTop[IP.of.Pipeline_16]: <H1>Traffic Analysis for 16 -- </H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD> in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>127.0.0.2 ()</TD></TR>
#  </TABLE>


### Interface 17 >> Descr: '' | Name: '' | Ip: '127.0.0.3' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.17)
###     SNMPv1_Session (remote host: "IP.of.Pipeline" [IP.of.Pipeline].161)
###                       community: "PassworD"
###                      request ID: 1297677504
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[IP.of.Pipeline_17]: 17:PassworD at IP.of.Pipeline:
# SetEnv[IP.of.Pipeline_17]: MRTG_INT_IP="127.0.0.3" MRTG_INT_DESCR=""
# MaxBytes[IP.of.Pipeline_17]: 0
# Title[IP.of.Pipeline_17]: Traffic Analysis for 17 --
# PageTop[IP.of.Pipeline_17]: <H1>Traffic Analysis for 17 -- </H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD> in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>127.0.0.3 ()</TD></TR>
#  </TABLE>


### Interface 18 >> Descr: '' | Name: '' | Ip: '127.0.0.1' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.18)
###     SNMPv1_Session (remote host: "IP.of.Pipeline" [IP.of.Pipeline].161)
###                       community: "PassworD"
###                      request ID: 1297677505
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[IP.of.Pipeline_18]: 18:PassworD at IP.of.Pipeline:
# SetEnv[IP.of.Pipeline_18]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR=""
# MaxBytes[IP.of.Pipeline_18]: 0
# Title[IP.of.Pipeline_18]: Traffic Analysis for 18 --
# PageTop[IP.of.Pipeline_18]: <H1>Traffic Analysis for 18 -- </H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD> in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>127.0.0.1 (localhost)</TD></TR>
#  </TABLE>





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list