[mrtg] Re: What am I doing wrong?

[Andreas Nolte]

Hello Christian,

the 1.3.6.1.2.1 points direct to MIB2 branch of the MIB Tree. I think you try to go to the private MIB of your router manufacturer. The private MIBs are located under 1.3.6.1.4.1 branch of the MIB tree. The number 420 seems to me like the ID of private MIB extensions of your manufactirer. You can test these with the snmpwalk command: snmpwalk 61.9.32.33 public enterprises. Then you get all the variables under the enterprises branch of the MIB tree.

I hope this helps.

regards Andreas


On Fri, 23 Nov 2001 17:05:16 +0800
Christian Fuentes <xtianjay at mozcom.com> wrote:

> 
> I'm very new at this so pls. bear with me. I'm trying to monitor the 64K
> traffic of one of our routers. It only has 1 synchronous port with the
> ff: IP address: 61.9.32.33
> 
> This are the lines I used in using "cfgmaker":
> 
> cfgmaker --global 'WorkDir: /home/httpd/mrtg' \
>             --global 'Options[_]: bits,growright' \
>             --ifref=ip \
>             --output /home/httpd/mrtg/cfg/mrtg.cfg \
>             --public at 61.9.32.33
> 
> The error that keeps coming out:
> 
> SNMP error: No response received
> SNMPWALK Problem for 1.3.6.1.2.1.420.1.2 on public at 61.9.32.33
> 
> Hope you can help.
> 
> Xtianjay
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
> 


-- 
******************

Andreas Nolte
Email: anolte at ccietac.de


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi