[mrtg] Re: Questions!

[Troy Arnold]

That answers a ton of questions.  LoL thanks, haveint found that anywhere.
So does anyone know what the two default OID's are ?

-----Original Message-----
From: josh elson [mailto:josh at webintellects.com]
Sent: Friday, November 30, 2001 1:56 PM
To: 'Troy Arnold'
Subject: RE: [mrtg] Questions!


Im pretty sure the 2 is there because you must have 2 OIDs and that just
specifies to use the 2 default OIDs instead of writing out the strings. 

Kind Regards,
--------------------------------------------------
Josh Elson
WebIntellects Technical Support
josh at webintellects.com
800-994-6364
760-476-9313
www.webintellects.com
--------------------------------------------------

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Troy Arnold
Sent: Friday, November 30, 2001 11:31 AM
To: MRTG (E-mail)
Subject: [mrtg] Questions!


Now comes the next questions:  

I write my own config files and dont like to use configmaker this is
what I
have so far

HtmlDir: /var/www/html/mrtg/html
ImageDir: /var/www/html/mrtg/images
LogDir: /var/www/html/mrtg/logs
IconDir: /var/www/hmtl/mrtg/mrtgicons
WriteExpires: Yes
Options[_]: growright, bits
MaxBytes[_]: 193000
Title[^]: Traffic Analysis for
PageTop[^]: <H1> Stats for
PageTop[$]: Please contact Troy with any questions

Title[SanaRt1]: SanaRt1
PageTop[SanaRt1]: Interface FastEther0/0 </H1>
Target[SanaRt1]: 2:public at 10.10.100.1     <-----------------What is the
2
for ???  
MaxBytes[SanaRt1]: 1250000

Title[DesmHost]: Des Moines
PageTop[DesmHost]: Serial Interface to Des Moines
Target[DesmHost]: 2:public at 10.25.7.1
MaxBytes[DesmHost]: 48000

Title[DesmRemote]: Des Moines
PageTop[DesmRemote]: Serial Interface to San Antonio
Target[DesmRemote]: 2:public at 10.25.7.2
MaxBytes[DesmRemote]: 48000


So here we go:

1. My graph has a red dotted line at the 384Kb level, I think this is
right.
But it does not seem traffic is going over this level.  By me setting
the
MaxBytes to 48000 am I really saying do not graph anything over 48000?

2. I dont understand why the port number is in front of the public
srting.
I do understand that you can put OID's there to , ( I guess ), look for
a
certian type of traffic, be it: errors, ipx traffic, and so on....  Does
it
matter what IP of the interfce that I use.  My router has 3 different
interfaces, do it matter which one I point it to ???????  

3.  When looking at the other side of the link as the part of the config
above does, does there need to be a - sign in front of the 2 ??????


I know there are a lot of questions here but this is where I getting
stuck
at!!!  

Thanks

Troy

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi