[mrtg] Re: Off Topic - Cisco T1 Question

[Barber, Erik A.]

Hi Jim,

Actually, 193 kBYTES/s is T1 speed, as 193000 bytes is 1544000 BITs.  Try
putting an "Option [_]: bits" at the top of your config file.

Erik

-----Original Message-----
From: Hunt, Jim [mailto:HuntJ at nwsc.k12.in.us]
Sent: Thursday, October 11, 2001 9:13 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Off Topic - Cisco T1 Question


Content-Type: text/plain;
	charset="iso-8859-1"

I have a T1 between 2 buildings.  (This is leased from a local Telco.)  When
I ran MRTG against the router, I got a reading of 193.0 kBytes/sec for the
line speed.  Obviously that isn't a T1.  The Cisco routers are a 1720 at
each end connected directly to the smart jack (with no CSU/DSU) and the LAN.
Is there anyway for me to verify the bandwidth on the T1 other than knowing
it is saturated and very slow.  I have full access to the routers.
 
Jim Hunt
Microsoft Certified Systems Engineer
Northwestern School Corporation
 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi