[mrtg] Re: Bits and bytes
Jeroen Geusebroek
Jeroen.Geusebroek at intellit.nl
Tue Oct 16 17:17:04 MEST 2001
Ok, i finally fixed it with the Maxbytes * 8.
I am still confused about the interfaces this router has.
Thank all for the help.
Regards,
Jeroen
-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Paul C. Williamson
Sent: dinsdag 16 oktober 2001 17:09
To: Jeroen.Geusebroek at intellit.nl; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Bits and bytes
Is this the number on the first line of the log? If the interface
doesn't have much of a load, you won't see much.
Remember, mrtg does rate of change over a given period of
time. If the rate of change is too little vs. the time that has
elapsed, there won't be much to look at.
A rough explanation would be that if you had 300 bytes pass
through the interface in 5 minutes, it would show 1 byte/s
during that 300 second period.
300 bytes/300 seconds = 1 byte/sec
This does not account for the fact that you will most likely not be
able to sample the interface at EXACTLY 300 seconds, so then
the MRTG normalization kicks in, which will open up a whole
'nother can of worms...
Paul
>>> "Jeroen Geusebroek" <Jeroen.Geusebroek at intellit.nl> 10/16/01 10:43AM
>>>
>Yep. That looks like an ethernet interface. Right?
>1250000 * 8 = 10000000
>1,250,000 bytes = 10,000,000 bits
>You should be fine.
Alright i am trying this.
But to get this straight, wouldn't this just only affect the MAX amount
of
Bytes that come in? Lets say mrtg checks snmp and gets a value of
100(which is bytes for this device) how does mrtg handle this?
Jeroen
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
More information about the mrtg
mailing list