[mrtg] Previous posting wrong subject line...

[Matt Sommer]

Sorry about having the wrong subject line in the last message.  I forgot
to change it (obviously).  My bad.  




____________________________________________________________________________
Matt Sommer,  CCNA
Network Analyst
Saginaw Valley State University
Phone:  989-497-4915

>>> "Matt Sommer" <mlsommer at svsu.edu> 10/17/2001 11:29:30 PM >>>

Hello all, 

I am having difficulty getting MRTG to poll a Cisco 6509 MSFC2.  I
wondered if anyone with experience monitoring this particular platform
could help me.  I'm sure my problem stems from the fact that we're
running both CatOS and IOS on this machine, however I don't know what
the solution to get around this problem is.  The IP address I'm using
is
the "CatOS side" management interface.  As I understand it, I can't
monitor the router interfaces because they are "virtual" in this
situation.  The following are the errors I'm getting when attempting
to
use cfgmaker:   (Thank-you sooo much for ANY help on this, it will be
much appreciated)

C:\mrtg-2.9.17\bin>perl cfgmaker --global "WorkDir: M:\mrtgdata"
--global "Optio
ns[_]: growright,bits" --ifref=ip --ifdesc=alias
--output=mrtgtest2.cfg
xxx at xxx

--base: Get Device Info on xxx at xxx:
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx" [xxx].xxx)
                  community: "xxx"
                 request ID: 485765018
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.9.17/bin\..\lib\mrtg2/SNMP_util.pm line 450
SNMPGET Problem for sysDescr sysContact sysName sysLocation
sysObjectID
on xxx@
xxx:
 at cfgmaker line 657
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because xxx at xxx: does not seem to s
upport it
--snpo: Skipping ifDescr scanning because xxx at xxx: does not seem to
support it
--snpo: Skipping ipAdEntIfIndex scanning because xxx at xxx: does not s
eem to support it
--snpo: Skipping ifType scanning because xxx at xxx: does not seem to s
upport it
--snpo: Skipping ifPhysAddress scanning because xxx at xxx: does not se
em to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx" [xxx].xxx)
                  community: "xxx"
                 request ID: 485765024
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.9.17/bin\..\lib\mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on xxx at xxx
 at cfgmaker line 107
--base: Walking ifType
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx" [xxx].xxx)
                  community: "xxx"
                 request ID: 485765025
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.9.17/bin\..\lib\mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.3 on xxx at xxx:
 at cfgmaker line 107
--base: Walking ifSpeed
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx" [xxx].xxx)
                  community: "xxx"
                 request ID: 485765026
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.9.17/bin\..\lib\mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on xxx at xxx:
 at cfgmaker line 107
--base: Walking ifAdminStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx" [xxx].xxx)
                  community: "xxx"
                 request ID: 485765027
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.9.17/bin\..\lib\mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.7 on xxx at xxx:
 at cfgmaker line 107
--base: Walking ifOperStatus
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx" [xxx].xxx)
                  community: "xxx"
                 request ID: 485765028
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.9.17/bin\..\lib\mrtg2/SNMP_util.pm line 540
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.8 on xxx at xxx:
 at cfgmaker line 107
--base: Writing mrtgtest2.cfg

C:\mrtg-2.9.17\bin>


Thoughts?

Thanks you!


____________________________________________________________________________
Matt Sommer,  CCNA
Network Analyst
Saginaw Valley State University
Phone:  989-497-4915

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi