[mrtg] Help with Cisco 6509 MSFC

[Randall.Coffelt at tellabs.com]

When I run cfgmaker against a 6509 msfc, I either get a EOBC interface 
??  or get no interfaces.....

Can someone help???

I get this in the CFG file

### Interface 3 >> Descr: 'Vlan1' | Name: 'Vl1' | Ip: '10.10.50.250' | 
Eth: '' ###
### The following interface is commented out because:
### * it is a cisco VLAN interface
# 
# Target[10.10.50.250_Vlan1]: \Vlan1:........ at 10.10.50.250:
# SetEnv[10.10.50.250_Vlan1]: MRTG_INT_IP="10.10.50.250" 
MRTG_INT_DESCR="Vlan1"
# Directory[10.10.50.250_Vlan1]: 6509-ECOM1-MSFC-A
# MaxBytes[10.10.50.250_Vlan1]: 125000000
# Title[10.10.50.250_Vlan1]: Vlan1 -- 6509-ecom1-msfc-a
# PageTop[10.10.50.250_Vlan1]: <H1>Vlan1 -- 6509-ecom1-msfc-a</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>6509-ecom1-msfc-a in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Vlan1  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Vl1</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>1000.0 Mbits/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>10.10.50.250 ()</TD></TR>
#  </TABLE>




Thanks,
**************************
Randall Coffelt



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi