[mrtg] Re: error starting mrtg

Wagner Garcia Campagner wagnergc at itautec.com.br
Tue Oct 30 11:27:54 MET 2001


Hi Bhupesh,

Perl is correctly installed on my machine and it is specified in the path
too.

It worked correctly for the cfgmaker.

Thanks,
Wagner

-----Original Message-----
From: Bhupesh Devgun [mailto:bdevgun at cadence.com]
Sent: terça-feira, 30 de outubro de 2001 12:03
To: Wagner Garcia Campagner; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] error starting mrtg


Hi
   pls check if perl is installed in your system .
Ensure its specified in the path .


Thanks and Regards

Bhupesh Devgun
Sr Systems Engineer
Cadence Design Systems India Pvt. Ltd
Work Phone :+91-120-4562842 Extn. 4276
Vmail      :543-4276
Cell Email : 9811191315 at essarcellphone.com
Cell Phone :+91-9811191315

"Save Earth,its the only planet we have got"



> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
> Behalf Of Wagner Garcia Campagner
> Sent: Tuesday, October 30, 2001 3:25 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] error starting mrtg
>
>
>
> Hi,
>
> I'm trying to run mrtg to monitor my computer but i get the
> following error
> when i do:
>
> perl mrtg mrtg.cfg
>
>
>
> The name specified is not recognized as an
> internal or external command, operable program or batch file.
> WARNING: Rateup died from signal 0
>  with Exit Value 1 when doing router 'wagnergc_2'
>  Signal was 0, Returncode was 1
>
>
>
> I've done perl cfgmaker acessos at wagnergc > mrtg.cfg and my
> mrtg.cfg file is
> here:
>
> #############################################################
>
> WorkDir: c:\meus documentos\mrtg\mrtg-2.9.17\mrtgdata
>
> Options[_]: growright, bits
>
> Target[wagnergc_2]: 2:acessos at wagnergc:
> SetEnv[wagnergc_2]: MRTG_INT_IP="10.25.1.138"
> MRTG_INT_DESCR="3Com EtherLink
> PCI"
> MaxBytes[wagnergc_2]: 1250000
> Title[wagnergc_2]: Traffic Analysis for 2 -- WAGNERGC
> PageTop[wagnergc_2]: <H1>Traffic Analysis for 2 -- WAGNERGC</H1>
>  <TABLE>
>    <TR><TD>System:</TD>     <TD>WAGNERGC in \\10.1.25.138</TD></TR>
>    <TR><TD>Maintainer:</TD> <TD>administrator</TD></TR>
>    <TR><TD>Description:</TD><TD>3Com EtherLink PCI  </TD></TR>
>    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
>    <TR><TD>ifName:</TD>     <TD></TD></TR>
>    <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
>    <TR><TD>Ip:</TD>         <TD>10.25.1.138 (link)</TD></TR>
>  </TABLE>
>
> ###################################################################
>
> I'm using Win NT 4.0.
>
> Thanks in advance,
> Wagner Garcia Campagner
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list