[mrtg] Re: AW: ping probe & W2K

[Richard Stinchcombe]

FYI, there is a good "primer" for w2k and mrtg located at
http://snmpboy.rte.microsoft.com.  It shows how to monitor W2K with SNMP,
shows how to export "performance monitor's" for snmp and even offers some
sample mrtg.cfg.

I have one favor.  Please answer these two questions for me:
1.  In the PERFMIB primer it says, "Use of the MIB-II HOSTS MIB is
recommended over PERFMIB... What is and where is MIB-II HOSTS MIB.
2.  I couldn't get it to work.  I did the following:
     aa.  Copied perfmib.dll abd permib to the %system32% directory
     bb.  Merged the two reg files (yes, I checked and it installed
correctly)
     cc.  Restarted the SNMP service.
    After doing above, I do not get ANY of the private MIBs it says I can
get.
    The only error I can see in the event log is as follows:

		The Open Procedure for service "Nbf" in DLL
            "C:\WINNT\system32\perfctrs.dll" failed.
             Performance data for this service will not be
             available. Status code  returned is data DWORD 0.

Believe Nbf is NetBios(f?).  Anyway, I think it says I just won't be able to
get data for Nbf...so, I should be able to get data for all the other
performance data but I don't.

Any suggestions?  Any links for the same sort of thing?

Best regards,
Richard Stinchcombe

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of David Sawyer
Sent: Tuesday, September 11, 2001 6:42 PM
To: 'Martin Jussel'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: AW: ping probe & W2K



> > > - What I've to add in the config file if I want ping more
> > than one host?
> > >
> > You need to create a new script for each device as you would with MRTG
>
> Hi,
>
> Sorry I'm still a novice:
>
> script? You mean a perl script? Is it really necessary to create a perl
> script for each host? Isn't it possible to extend the config file to log
> more than one host?
>
That is what I mean, maybe script is the wrong word :-)


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi