[mrtg] Re: cisco 3524xl snmp version

[Bishop, Dean]

the 3500 series switches should support SNMPv2c but not if your IOS is out
of date.

from:
http://www.cisco.com/warp/public/477/SNMP/snmp_faq.html#Q6


Which Versions of SNMP Are Supported in my Cisco IOS® Software Image? 

A. All Cisco IOS Software releases to date include SNMPv1: 

Releases prior to Cisco IOS Software 11.2(6)F (including all releases of 11.
2 and 11.2P) support the SNMPv2 Party-based protocol. 

Releases as from Cisco IOS Software 10.2(13), 10.3(11), 11.0(8), 11.1(3),
11.2(1), and 11.3 and later have SNMPv2 removed (CSCdi53343).
(SNMPv2, RFCs 1441-1452, have been replaced by SNMPv2C, RFCs 1901-1908). 

Releases as from Cisco IOS Software 11.2(6)F and later have SNMPv2C
support. 

Releases as from Cisco IOS Software 12.0(3)T and higher have SNMPv3 support

hth,
dean

-----Original Message-----
From: dongkkim at ncsoft.net [mailto:dongkkim at ncsoft.net]
Sent: Tuesday, August 06, 2002 9:58 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] cisco 3524xl snmp version


Hi, all
Cisco 3524XL switch doesn’t seem to support snmp v2c and the traffic of
Giga port is distorted.
How can I monitor the traffic over 100Mbps in cisco 3524XL with MRTG ?
Thanks
 
Dong K. Kim

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi