[mrtg] Re: MAC ID -> IP

[Chirhart, Brian]

Hey Daniel - 
	If you use GetIF, it has a very good interface description tab.  Hit
that switch with GetIF and I'll bet you that it will make things a lot
clearer.

-----Original Message-----
From: Daniel R . Kilbourne [mailto:drk at netophilia.net]
Sent: Thursday, January 03, 2002 4:07 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] MAC ID -> IP



So, this is not directly mrtg related, but....

I am monitoring a few HP ProCurve switches at our co-lo center. I am able to
do an snmpwalk on them, but have no console or telnet access to them. When I
run cfgmaker against them, all I see for descriptions are things like
"Traffic Analysis for 1"

Anyone have any ideas how I can get the IP address from each individual
port? Is there a way to at least get the MAC ID and then match it up? Any
ideas I am missing?


-- 
--------------------------------
    Daniel R. Kilbourne
    drk at netophilia.net
________________________________

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi