[mrtg] Re: router fraffic

[Paul C. Williamson]

What interface?  There is no way to obtain "stats on the router" 
if the router has more than one interface.  If it doesn't, then 
what's the point of the router if it only has one interface?

You can add up all the inbound traffic of each interface and the 
same for the outbound and put all that on the same graph.  Is 
that what you want to do?

At a very minimum, there are times when you want to check the 
inbound of one interface to the outbound of the other to make sure 
things are working properly.  I catch about 1 or 2 misconfiguations 
(on our ISPs part) a month because of the review of the graphs.

Paul

>>> <fcarioca at netcourrier.com> 01/22/02 09:11AM >>>

hello,

when i make a cfgmaker public at ip_adress, it gives me stats about all the ports of the router....
i would like just to obtain stats in one graph about the traffic on the router (input&output)

it is possible?

i have cisco 7206 and 2600 routers

thanks

fred!

----------------------------------------------------------------------
NetCourrier, votre bureau virtuel sur Internet : Mail, Agenda, Clubs, Toolbar...
Web/Wap : www.netcourrier.com 
Téléphone/Fax : 08 92 69 00 21 (0,34 E TTC/min - 2,21 F TTC/min)
Minitel: 3615 NETCOURRIER (0,15 E TTC/min - 1,00 F TTC/min)


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi