[mrtg] Re: MRTG with ADSL

[Cadena, Carlos]

Hi,

If you have snmp on the ADSL device, that menas that is able to send "snmp
information". But whre to send it? Then you need to configure a snmp-server
and "tell" the ADSL device to send snmp information to this snmp-server.

If ADSL devices have not snmp or this equipment is not uder your control
(leasing), then, as I suggested yesterday, you can try to monitor traffic at
the intersection point between the ADSL and the LAN (in a port of a switch,
for instance). In this case you will monitor (o measure) all the traffic
that is incoming/outgoing to/from the ADSL link.

Best Regards,
             Carlos Cadena
             e-mail: carlos.cadena at dpcdsb.org

&&&&&&&&&&&&&&&&&&&&&  &&&&&&&&&&&&&&&&&  &&&&&&&&&&&&&
-----Original Message-----
From: Frank Carreiro [mailto:fcarreiro at loweryinc.com]
Sent: Wednesday, January 30, 2002 1:27 PM
To: Alejandro Cabrera Obed
Cc: MRGT (Multi Router Graphic Tool)
Subject: [mrtg] Re: MRTG with ADSL



If anyone has done this I also would be interested in the setup.

I've checked my access list and snmp is enabled on the ADSL device. 
 snmpwalk basically errors out suggesting that snmp is unavailable. 
 Perhaps snmp-server should be configured?  Just a thought.

Thx



Alejandro Cabrera Obed wrote:

>Hi everybody,
>
>In this opportunity I ask you if I can use MRTG in order to take measures
of
>an ADSL link.
>May I have to configure MRTG in the ADSL modem or in my Proxy server ???
>Thanks a lot !!!
>
>Alejandro Cabrera Obed
>E-mail: sisdis at tournet.com.ar
>



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi