[mrtg] The following interface is commented out because it has a speed of which makes no sense

[Dan Tran]

I was able to setup all of my network gears, and windows server, but is
having some trouble with a sun box running solaris 2.7.

I'm getting the below mrtg.cfg error:
### Interface 2 >> Descr: 'hme0' | Name: '' | Ip: '172.16.12.92' | Eth:
'08-00-20-ce-8a-8a' ###
### The following interface is commented out because:
### * has a speed of which makes no sense

Looks like it's does not understand the interface speed.
I checked on the unix box that it is running 100mbps full duplex.

I then edited the mrtg.cfg file and ran it again and the below is what I
get:
The mrtg.cfg was generated with the error  # MaxBytes[172.16.12.92_2]: 0
on the initial run.

C:\mrtg-2.9.18\bin>perl mrtg mrtg.cfg
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 2 (OID: 1.3.6.1.2.1.2.2.1.16.2)
SNMPv1_Session (remote host: "172.16.12.92" [172.16.12.92].161)
                  community: "nnZ8T"
                 request ID: 1194387115
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ifInOctets.2 ifOutOctets.2 sysUptime sysName on
nnZ8T at 172.16.12.92:
WARNING: skipping because at least the query for ifInOctets.2 on
172.16.12.92 did not succeed
ERROR: Target[172.16.12.92_2][_IN_] ' $$target[0]{$mode} ' did not eval into
defined data
ERROR: Target[172.16.12.92_2][_OUT_] ' $$target[0]{$mode} ' did not eval
into defined data
WARNING: Skipping Update of 172.16.12.92_2, inlast is not defined
WARNING: Skipping Update of 172.16.12.92_2, outlast is not defined

Your input or suggestion is greatly appreciated.
Thanks a million.
Dan


# Created by
# cfgmaker nnZ8T at 172.16.12.92 --global 'WorkDir:
D:\Inetpub\wwwroot\mrtg' --global 'Options[_]: growright' --output mrtg.cfg

### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:\mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
WorkDir: D:\Inetpub\wwwroot\mrtg
Options[_]: growrightOptions[_]: growright
######################################################################
# System: snetmgt2
# Description: SunOS snetmgt2 5.7 Generic_106541-14 sun4u
# Contact: Dan Tran 949-823-5539
# Location: IBG IDC
######################################################################

### Interface 2 >> Descr: 'hme0' | Name: '' | Ip: '172.16.12.92' | Eth:
'08-00-20-ce-8a-8a' ###
### The following interface is commented out because:
### * has a speed of which makes no sense
#
# Target[172.16.12.92_2]: 2:nnZ8T at 172.16.12.92:
# SetEnv[172.16.12.92_2]: MRTG_INT_IP="172.16.12.92" MRTG_INT_DESCR="hme0"
# MaxBytes[172.16.12.92_2]: 0
# Title[172.16.12.92_2]: Traffic Analysis for 2 -- snetmgt2
# PageTop[172.16.12.92_2]: <H1>Traffic Analysis for 2 -- snetmgt2</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>snetmgt2 in IBG IDC</TD></TR>
# <TR><TD>Maintainer:</TD> <TD>Dan Tran 949-823-5539 </TD></TR>
# <TR><TD>Description:</TD><TD>hme0 </TD></TR>
# <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>172.16.12.92 (snetmgt2.downeysavings.com)</TD></TR>
# </TABLE>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi