[mrtg] Re: monitoring two lines as one

[Sawyer, David]

Just add the two interfaces together in the target parameter.

Target[Internet]: \Serial1:public at device + \Serial2:public at device

Just remember to also increase the MaxBytes parameter.

HTH
David Sawyer

Email: david.sawyer at mckesson.co.uk

 www.geocities.com/mrtg_daemon
   MRTG/RRDTool daemon for Windows9x/ME/2k
   MRTG GUI ConfigMaker for Windows9x/ME/2k
   TopTalker - See who the top talkers are on your network


-----Original Message-----
From: jprospero at bportugal.pt [mailto:jprospero at bportugal.pt]
Sent: 12 July 2002 13:35
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] monitoring two lines as one


Hello all,

I've being monitoring our Internet line (2Mb/s) in a Cisco 2500 (IOS 11.3) 
with MRTG (2.9.17) in Windows 2000.
This week we added another 2MB/s line to the Cisco and I've added it to 
MRTG.

All is working fine but I'd like to also show a graph of the 2 lines as a 
single line of 4 MB/s. Is it possible ?
The two lines are two independent serial lines (no multilink).

Thanks in advance for your help.

João Próspero Luís
Bank of Portugal


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi