[mrtg] AW: AW: Re: Help!

[Michel.Grossenbacher at coop.ch]

hm IMHO it should work with pure accounting.
I just had a look on one of our L3 Switches. I got a command like this:

ip accounting-threshold

in the enable(config) mode. There are 3 different ip accounting- entries.

I didnt test it but I think it should work this way too. But dont ask me how, I never did it on my own 8)

Michel

-----Ursprüngliche Nachricht-----
Von: Jonathan P Tornea [mailto:jonathan.tornea at d1asia.com]
Gesendet: Dienstag, 23. Juli 2002 12:16
An: Michel.Grossenbacher at coop.ch; mrtg at list.ee.ethz.ch
Betreff: RE: [mrtg] AW: Re: Help!


Absolutely right.  I have a Netflow license on my IOS but no HPUx nor Sun
Solaris to run Netflow with. :(

Jonathan P Tornea
Network  Engineer
DataOne  Asia (Philippines) Inc

Tel : +632 580 9888
DID: +632 580 9831


---------------------------
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom they are
addressed. If you are not the intended recipient or the person responsible,
be advised that you have received this e-mail in error and that any use,
dissemination, forwarding, printing or copying of this e-mail is strictly
prohibited. If you have received this e-mail in error, please immediately
notify DataOne Asia (Philippines) Inc at +632 580 9888.



-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Michel.Grossenbacher at coop.ch
Sent: Tuesday, July 23, 2002 5:42 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] AW: Re: Help!



hm about Cisco Routers
as far as I know the Cisco Routers support IP Accounting, but I think there
musst be a "special" kind of IOS on it. I mean there are different levels of
IOS Releases: IP only, Enterprise and so. I think the Enterprise Versions
should support IP Accounting but I dont know which's the lowest "level" that
supports it.

Michel



-----Ursprüngliche Nachricht-----
Von: Jonathan P Tornea [mailto:jonathan.tornea at d1asia.com]
Gesendet: Dienstag, 23. Juli 2002 11:39
An: Pataud Frederic; Mrtg
Betreff: [mrtg] Re: Help!



Hi,

thanks for the help.  unfortunately ipac-ng is for linux firewalls,
ipchains/tables and stuff  i believe.  im using pix firewall and cisco
routers.  so im looking for an alternative software to Cisco's Netflow.
implementing Netflow is quite costly, considering the requirement (HPUX/Sun
Solaris) while i only have pentium base servers and Linux to play around
with.  anyways, thanks for all who shared thoughts.

regards,

Jonathan P Tornea
Network  Engineer
DataOne  Asia (Philippines) Inc

Tel : +632 580 9888
DID: +632 580 9831


---------------------------
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom they are
addressed. If you are not the intended recipient or the person responsible,
be advised that you have received this e-mail in error and that any use,
dissemination, forwarding, printing or copying of this e-mail is strictly
prohibited. If you have received this e-mail in error, please immediately
notify DataOne Asia (Philippines) Inc at +632 580 9888.



-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Pataud Frederic
Sent: Tuesday, July 23, 2002 4:16 PM
To: Mrtg
Subject: [mrtg] Re: Help!



Have a look to ipac-ng
http://sourceforge.net/projects/ipac-ng/


----- Original Message -----
From: "Jonathan P Tornea" <jonathan.tornea at d1asia.com>
To: "Mrtg" <mrtg at list.ee.ethz.ch>
Sent: Tuesday, July 23, 2002 10:04 AM
Subject: [mrtg] Help!


>
> Hi,
>
> this is quite off topic, but i don't know where can i get such
information.
> Does anybody know where can i get a sort of IP accounting software?  I
want
> to get the amount of traffic consumed by each individual ip addresses.
> anybody who could shed some light would be greatly appreciated.  Thank
you.
>
> regards,
>
> Jonathan P Tornea
> Network  Engineer
> DataOne  Asia (Philippines) Inc
>
> Tel : +632 580 9888
> DID: +632 580 9831
>
>
> ---------------------------
> This e-mail and any files transmitted with it are confidential and are
> intended solely for the use of the individual or entity to whom they are
> addressed. If you are not the intended recipient or the person
responsible,
> be advised that you have received this e-mail in error and that any use,
> dissemination, forwarding, printing or copying of this e-mail is strictly
> prohibited. If you have received this e-mail in error, please immediately
> notify DataOne Asia (Philippines) Inc at +632 580 9888.
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi