[mrtg] Re: scale problem

johan johan30 at easynet.be
Sun Jul 28 16:47:55 MEST 2002


Hi,

I found it. Indead, the routers2.cgi makes a file in the rrd-logs
routers2.conf and here I could see unscaled = yes.
I changed it in no and it works fine now.
Thx a lot for your help

Greetz,
Johan

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of johan
Sent: Sunday, July 28, 2002 3:30 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] scale problem



Hi,

I have the following problem : I monitor some cisco routers with mrtg
/rrd-tool and the script routers2.cgi the incoming and outgoing
bandwidth. They have for example a maximum bandwidth 1mbps. That works
fine, but I want to see when f.ex. the traffic is 10 bits per second
also the ingoing and outgoing traffic : now I don't see anything,
becausee the scale is 1 mbps. I know it is possible that the scale on
the graphic changes with the average traffic.But I don't know how.
anybody can help?

here part of an example cfg-file

Logdir: D:\applications\denika\data\rrd-logs
PathAdd: D:\rrdtool-1.0.38.x86distr\src\tool_release
LibAdd: D:\rrdtool-1.0.38.x86distr\perl-shared
LogFormat: rrdtool
Options[_]:growright, bits
WorkDir: D:\applications\denika\data\rrd-logs

Target[ip-address_Serial0]: \Serial0:community at ip:
SetEnv[ip-address_Serial0]: MRTG_INT_IP="194.108.251.162"
MRTG_INT_DESCR="Serial0"
MaxBytes[ip-address_Serial0]: 193000
WithPeak[ip-address_Serial0]: ymw
Title[ip-address_Serial0]: Serial0 -- name_customer
PageTop[ip-address_Serial0]: <H1>Serial0 -- name_customer</H1>  <TABLE>
   <TR><TD>System:</TD>     <TD>name_customer in
Pitsburg_Corning</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>propPointToPointSerial (22)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>193.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>194.108.251.162 ()</TD></TR>
 </TABLE>

Greetings,
Johan 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list