[mrtg] Re: 2-CPU Graphing

[Sawyer, David]

If your using native MRTG try adding noo to the options parameter.

noo = NO Out (second OID)
noi = NO In (first OID)

noo and noi will only work with MRTG v2.9.11 and above.

HTH
David Sawyer

Email: david.sawyer at mckesson.co.uk

 www.geocities.com/mrtg_daemon
   MRTG/RRDTool daemon for Windows9x/ME/2k
   MRTG GUI ConfigMaker for Windows9x/ME/2k

-----Original Message-----
From: Scott Moseman [mailto:smoseman at novolink.net]
Sent: 26 June 2002 15:49
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] 2-CPU Graphing


The green graph shows the correct CPU load, while the
blue graph bounces around between 0 and 100.  Is there
a way that I can graph just the "green" data points?  The
data would look perfect if I could just remove the "blue".

Thanks,

Scott Moseman


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi